Features: ` 2.5 GHz Bandwidth` 4.0 k Differential Transimpedance` 10 pA/Hz Typical Input Referred Noise` 2 mA Maximum Input Current` Offset Cancellation` Received Signal Strength Indication` Differential CML Data Outputs` Single +3.3V Supply` Bare-Die OptionApplication· SONET OC-48· SDH STM-16· AP...
ONET2511TA: Features: ` 2.5 GHz Bandwidth` 4.0 k Differential Transimpedance` 10 pA/Hz Typical Input Referred Noise` 2 mA Maximum Input Current` Offset Cancellation` Received Signal Strength Indication` Differe...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
VCC | Supply voltage (2) |
0.3 V to 4 V |
VOUT+ VOUT- | Voltage of OUT+ and Out-(2) |
VCC 1.5 to VCC +0.5V |
VFILTER VRSSI | Voltage of FILTER and RSSI(2) |
0.3 V to 4 V |
IIN | Current into IN |
4 mA to 4 mA |
IFILTER | Current into FILTER |
8 mA to 8 mA |
ESD | ESD rating at all pins except IN (3) |
2 kV (HBM) |
ESD rating at IN (3) |
1 kV (HBM) | |
TJ,max | Maximum junction temperature |
150°C |
Tstg | Storage temperature range |
65°C to 85°C |
TA | Operating free-air temperature range |
40°C to 85°C |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolutemaximumrated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) For optimum high-frequency performance, the input pin has reduced ESD protection.
The ONET2511TA is a high-speed transimpedance amplifier used in SDH/SONET systems with data rates up to 2.5Gbps. It features a low input referred noise, 2.5GHz bandwidth, 4.0k transimpedance,and a received signal strength indicator.
The ONET2511TA device is available in die form and requires a single +3.3V supply. It is very power efficient and dissipates less than 83 mW (typical). It is characterized for operations from 40°C to 85°C.