Features: Direct RAM data display using the display RAM. When RAM data bit is 0, it is not displayed. When RAM data bit is 1, it is displayed. (In normal display mode)RAM capacity: 65 X 132 = 8580 bitsMany command functions: Read/Write Display Data, Display ON/OFF, Normal/Reverse Display, Page Add...
NT7501: Features: Direct RAM data display using the display RAM. When RAM data bit is 0, it is not displayed. When RAM data bit is 1, it is displayed. (In normal display mode)RAM capacity: 65 X 132 = 8580 b...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The NT7501 is a single-chip LCD driver for dot-matrix liquid crystal displays, which is directly connectable to a microcomputer bus. It accepts 8-bit serial or parallel display data directly sent from a microcomputer and stores it in an on-chip display RAM. It generates a LCD drive signal independent of the microprocessor clock.
The set of the NT7501 on-chip display RAM of 65 X 132 bits, and a one-to-one correspondence between the LCD panel pixel dots and the on-chip RAM bits, permits implementation of displays with a high degree of freedom.
As a total of 133 circuits of common and segment outputs are incorporated, a single chip of NT7501 can make 33 X 100 dots displays.
No external operation clock is required for RAM read/write operations. Accordingly, this driver can be operated with minimum current consumption and NT7501's on-board low-currentconsumption liquid crystal power supply can implement a high-performance handy display system with minimal current consumption and a minute LSI configuration.