NLC322522T-101K

The NLC322522T-101K is one member of the NLC322522T series.It has the following features of NLC322522T-101K including (1)The NLC series feature low DC resistance and high current handling capacities, making them ideal for power supply line applications,(2)They are available in form factors ranging from 2520 to 5650.Portable telephones, personal computers, hard disk drives, and other electronic equipment.

NLC322522T-101K can also be supplied via an external power supply. An integrated voice switch with loudspeaker amplifier of NLC322522T-101K enables hands-free or loud- hearing operation. With an anti-feedback function, acoustical feedback during loudhearing can be reduced significantly. The generated supply voltage is suitable for a wide range of peripheral circuits. W - Wiper of the Potentiometer. NLC322522T-101K is the wiper of the potentiometer. NLC322522T-101K position on the resistor array is controlled by the three-terminal control port. Voltage applied to the wiper cannot exceed the power-supply voltage, VCC, or go below ground. The IC NLC322522T-101K can be activated by the external control unit via the serial interface. The DIO line is called logic high if it is pulled up to the VDIO voltage level. The DIO line is called logic low if it is pulled down to the VSS voltage level. A low signal at the DIO line wakes-up the IC.

SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of NLC322522T-101K for any particular purpose, nor does SCILLC assume any liability arising of NLC322522T-101K out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages."Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under NLC322522T-101K patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.