Features: `Input Full-Swing VIN=VSS to VDD`Output Full-SwingVOM2.7V min`Low Input Offset Voltage VIO=5mV max`Single-Power-SupplyVDD=2.7 to 5.5V`Low Operating Current IDD=15uA typ`High Load Current IOH/IOL=200uA typ`Low Bias Current IIB=1pA typ`Compensation Capacitor Incorporated`Package Outline MT...
NJU7042: Features: `Input Full-Swing VIN=VSS to VDD`Output Full-SwingVOM2.7V min`Low Input Offset Voltage VIO=5mV max`Single-Power-SupplyVDD=2.7 to 5.5V`Low Operating Current IDD=15uA typ`High Load Current I...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER | SYMBOL | RATING | UNIT |
Supply Voltage | VDD | 7.0 | V |
Differential Input Voltage | VID | ±7.0 (Note1) | V |
Common Mode Input Voltage | VIC | -0.3~7.0 | V |
Power Dissipation | PD | 200 | mW |
Operating Temperature | Topr | -40 to +85 | |
Storage Temperature | Tstg | -55 to +125 |
Note1) If the supply voltage (VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified.
Note2) Decoupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit.
The NJU7042 is a single C-MOS operational amplifierpermitting input and output in full swing.
The operating voltage of NJU7042 is 2.7V to 5.5V and the input and output stage permits signal to swing between both of the supply rails.
The input offset voltage of NJU7042 is lower than 5mV, and the input bias current is as low as than 1pA, consequently very small signal around the ground level can be amplified.
Furthermore, The NJU7042 is packaged with very small MTP-5, therefore it can be especially applied to portable items.