NJG1303E

The NJG1303E is designed as GaAs MMIC mainly for driver amplifier of PHS base station in Japan. NJG1303E features very low distortion and Pacp id less than -70dBc at 17dBm output power. It has input and output matching circuits internally. It enables low voltage and high efficiency operation. Small plastic mold package are adopted.

NJG1303E has six features. (1)Low voltage operation (Vdd=3.0V). (2)Inpout and output internal matching circuits. (3)Low distortion (Pacp=-70dBc typ at 1.9GHz, 17dBm). (4)Low current consumption (Idd=170mA typ at 1.9GHz, 17dBm). (5)Reduction of parasitic oscillation. (6)EMP 14 maximum power dissipation 1000mW. Those are all the main features.

Some absolute maximum ratings of NJG1303E have been concluded into several points as follow. (1)Its drain voltage would be 6V. (2)Its gate voltage would be -4V. (3)Its input power would be 10dBm. (4)Its power dissipation would be 1000mW. (5)Its operating temperature range would be from -30°C to 85°C. (6)Its storage temperature range would be from -40°C to +150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of NJG1303E are concluded as follow. (1)Its operating frequency would be min 1.89GHz and max 1.92GHz. (2)Its drain voltage would be min 2.9V and typ 3.0V and max 5.3V. (3)Its gate voltage would be min -1.25V and typ -0.9V and max -0.6V. (4)Its idle current would be min 165mA and typ 170mA and max 175mA. (5)Its operating current would be min 170mA and typ 185mA and max 180mA. (6)Its gate current would be min -150uA and typ -70uA. (7)Its small signal gain would be min 20dB and typ 23dB and max 26dB. (8)Its gain flatness would be min 0 and typ 0.5dB and max 1.0dB. (9)Its Pout at 1dB compression would be min 21dBm and typ 22dBm. And so on. If you have any question or suggestion or want to know more information about NJG1303E please contact us for details. Thank you!