NCV7510

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
1. Reverse VDRN protection must be included in the application circuit.
2. VDRN transient voltage suppression must be included in the application circuit.
3. For additional information, see or download ON Semiconductor's Soldering and Mounting Techniques Reference Manual, SOLDERRM/D, and Application Note AND8003/D.

The NCV7510 high side MOSFET predriver is a fully programmable automotive grade product for driving solenoids or other unipolar actuators.

The NCV7510 is optimized for common−rail diesel fuel injection applications and includes an additional synchronous clamp MOSFET predriver. Peak and hold currents, peak dwell time and other features are programmable via the device's SPI port. Load current is continuously sampled and compared to the programmable 7−bit peak/hold DAC values while the load self−modulates to maintain the desired currents at each of the peak and hold points. Passive fault diagnostics monitor and protect the MOSFETs when a fault is detected. Fault data is available via SPI and an open−drain FAULT output provides immediate fault notification to a host controller.

The FlexMOS NCV7510 family of products offers application scalability through choice of external MOSFETs.