Features: • Best--in--Class Output Jitter Performance, ±20 ps Peak--to--Peak• 25 MHz to 400 MHz Programmable Differential PECL Outputs• Fully Integrated Phase--Lock--Loop with Internal Loop Filter• Parallel Interface for Programming Counter and Output Dividers During Poweru...
NBC12429A: Features: • Best--in--Class Output Jitter Performance, ±20 ps Peak--to--Peak• 25 MHz to 400 MHz Programmable Differential PECL Outputs• Fully Integrated Phase--Lock--Loop with Inte...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $4.94 - 6.32 / Piece
Phase Locked Loops (PLL) 3.3V/5V Programmable PLL Clock Generator
Symbol | Parameter | Condition 1 | Condition 2 | Rating | Unit |
VCC | Positive Supply | GND = 0 V | 6 | V | |
VI | Input Voltage | GND = 0 V | VIVCC | 6 | V |
Iout | Output Current | Continuous Surge |
50 100 |
mA mA | |
TA | Operating Temperature Range NBC12429 NBC12429A |
0 to 70 -40 to +85 |
°C | ||
Tstg | Storage Temperature Range | -65 to +150 | °C | ||
JA | Thermal Resistance (Junction--to--Ambient) | 0 lfpm 500 lfpm |
PLCC--28 PLCC--28 |
63.5 43.5 |
°C/W °C/W |
JC | Thermal Resistance (Junction--to--Case) | Standard Board | PLCC--28 | 22 to 26 | °C/W |
JA | Thermal Resistance (Junction--to--Ambient) | 0 lfpm 500 lfpm |
LQFP--32 LQFP--32 |
80 55 |
°C/W °C/W |
JC | Thermal Resistance (Junction--to--Case) | Standard Board | LQFP--32 | 12 to 17 | °C/W |
JA | Thermal Resistance (Junction--to--Ambient) | 0 lfpm 500 lfpm |
QFN--32 QFN--32 |
31 27 |
°C/W °C/W |
JC | Thermal Resistance (Junction--to--Case) | 2S2P | QFN--32 | 12 | °C/W |
Tsol | Wave Solder Pb Pb--Free |
<3 sec @ 248°C <3 sec @ 260°C |
265 265 |
°C |
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended OperatingConditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
The NBC12429 and NBC12429A are general purpose, Phase--Lock--Loop (PLL) based synthesized clock sources. The VCO will operate over a frequency range of 200 MHz to 400 MHz. The VCO frequency is sent to the N--output divider, where NBC12429 and NBC12429A can be configured to provide division ratios of 1, 2, 4, or 8. The VCO and output frequency can be programmed using the parallel or serial interfaces to the configuration logic. Output frequency steps of 125 kHz, 250 kHz, 500 kHz, or 1.0 MHz can be achieved using a 16 MHz crystal, depending on the output dividers. The PLL loop filter is fully integrated and does not require any external components.