Features: · Meets EUROCOM D1-IA8· Single Chip Full Duplex CVSD CODEC · On-chip Input and Output Filters · Programmable Sampling Clocks · 3- or 4-bit Companding Algorithm ·Powersave Capabilities · Low Power, 5.0V OperationApplication·Military Communications·Multiplexers, Switches, & Phones Spec...
MX619: Features: · Meets EUROCOM D1-IA8· Single Chip Full Duplex CVSD CODEC · On-chip Input and Output Filters · Programmable Sampling Clocks · 3- or 4-bit Companding Algorithm ·Powersave Capabilities · Lo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Min. | Max. | Units | |
Supply (VDD - VSS ) | -0.3 | 7.0 | V |
Voltage on any pin to V SS |
-0.3 | V + 0.3 | V |
Current | |||
V DD | -30 | 30 | mA |
V SS | -30 | 30 | mA |
any other | -20 | 20 | mA |
J / P / LH Packages | |||
Total Allowable Power Dissipation at TAMB =25 | - | 800 | mW |
Derating above 25 | - | 10 | mW/ above 25 |
Storage Temperature | -55 | 125 | |
Operating Temperature | -40 | 85 |
The MX619 is a Continuously Variable Slope Delta Modulation (CVSD) Codec designed for use in military communications systems. This device is suitable for applications in military delta multiplexers, switches, and phones. The MX619 is designed to meet EUROCOM D1-IA8 specifications.
Encoder input and decoder output filters are incorporated on-chip. Sampling clock rates can be programmed to 16, 32, or 64kbps from an internal clock generator or externally injected in the 8 to 64kbps range. The sampling clock frequency is output for the synchronization of external circuits.
The encoder has an enable function for use in multiplexer applications. Encoder and Decoder forced idle bias in decode. The companding capabilities are provided forcing 10101010...pattern in encode and aDD /2 circuit may be operated with an externally selectable 3- or 4-bit algorithm. The MX619 may be placed in standby mode by selecting Powersave. A reference 1.024MHz oscillator uses an external clock or crystal.
The MX619 operates with a supply voltage of 5.0V and is available in the following packages: 24-pin PLCC (MX619LH), 22-pin CERDIP (MX619J), and 22-pin PDIP (MX619P).