Features: · Single Chip full Duplex CVSD CODEC· On-chip Input and Output Filters· Programmable Sampling Clocks· 3- or 4-bit Companding Algorithm· Powersave Capabilities· Low Power, 5.0V OperationApplication· Digital PCN/PCS Systems· Digital Cordless Phones· Digital Delay Lines· Digital Voice Stora...
MX609: Features: · Single Chip full Duplex CVSD CODEC· On-chip Input and Output Filters· Programmable Sampling Clocks· 3- or 4-bit Companding Algorithm· Powersave Capabilities· Low Power, 5.0V OperationApp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Single Chip full Duplex CVSD CODEC
· On-chip Input and Output Filters
· Programmable Sampling Clocks
· 3- or 4-bit Companding Algorithm
· Powersave Capabilities
· Low Power, 5.0V Operation
Min. | Max. | Units | |
Supply (VDD - VSS) |
-0.3 |
7.0 |
V |
Voltage on any pin to VSS |
-0.3 |
VDD+0.3 |
V |
Current | |||
VDD |
-30 |
30 |
mA |
VSS |
-30 |
30 |
mA |
any other pin |
-20 |
20 |
mA |
J / P / LH / DW Packages | |||
Total Allowable Power Dissipation at TAMB = 25°C |
- |
800 |
mW |
Derating above 25°C |
- |
10 |
mW/°Cabove25°C |
Storage Temperature |
-40 |
85 |
°C |
Operating Temperature |
-40 |
85 |
°C |
The MX609 is a Continuously Variable Slope Delta Modulation (CVSD) Codec designed for use in cordless telephones.
The MX609 is suitable for applications in delta multiplexers, switches and phones. Encoder input and decoder output switched capacitor filters are incorporated on-chip. Sampling clock rates can be programmed to 16, 32 or 64K bits/second from an internal clock generator or externally injected in the 8 to 64K bits/second range. The internal clocks are derived from an on-chip reference oscillator driven by an externally connected crystal. The sampling clock frequency is output for the synchronization of external circuits.
The encoder has an enable function for use in multiplexer applications. When not enabled the encoder output
remains in a high-impedance "tri-state" mode. Companding circuits may be operated with an externally selectable 3- or 4-bit algorithm. The MX609 may be put in standby mode when Powersave is selected.