PinoutDescriptionThe MX29F016T4C-12 is a 16-mega bit flash memory organized as 2M bytes of 8 bits.MXIC's flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.The MX29F016T4C-12 is packaged in 40-pin TSOP or 44-pin SOP,48-pin TSOP.It is designed to ...
MX29F016T4C-12: PinoutDescriptionThe MX29F016T4C-12 is a 16-mega bit flash memory organized as 2M bytes of 8 bits.MXIC's flash memories offer the most cost-effective and reliable read/write non-volatile random acce...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: SpecificationsDescription The MX29F001T/B is a 1-mega bit Flash memory organized as 128K...
The MX29F016T4C-12 is a 16-mega bit flash memory organized as 2M bytes of 8 bits.MXIC's flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.The MX29F016T4C-12 is packaged in 40-pin TSOP or 44-pin SOP,48-pin TSOP.It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
Features of the MX29F016T4C-12 are:(1)single power supply 5V operation for read,erase and program;(2)fast access time is 90/120ns;(3)low power consumption;(4)command register architecture;(5)auto erase (chip§or) and auto program;(6)erase suspend/erase resume;(7)status reply;(8)group sector protect/unprotect for 5V/12V system;(9)group sector protection;(10)100000 minimum erase/program cycles;(11)latch-up protected to 100mA from-1V to VCC+1V;(12)low VCC write inhibit is equal to or less than 3.2V;(13)package type is 40pin TSOP,44-pin SOP,48-pin TSOP;(14)compatibilty with software compatible with single-power supply flash.
The absolute maximum ratings of the MX29F016T4C-12 can be summarized as:(1):the rating is ambient operating temperature,the value is -40 to 85,the unit is ;(2):the rating is storage temperature,the value is -65 to 125,the unit is ;(3):the rating is applied input voltage,the value is -0.5 to 7.0,the unit is V;(4):the rating is applied output voltage,the value is -0.5 to 7.0,the unit is V;(5):the rating is VCC to ground potential,the value is -0.5 to 7.0,the unit is V;(6):the rating is A9 & OE,the value is -0.5 to 13.5,the unit is V.