Features: ` Meets TIA/EIA-603 Standards` 47 CTCSS Tones + Notone` TX/RX Speech Filters` Improved Sinad` Serial or Parallel Programming` Easy P Interface` Scanning on any Channel` Standard 1MHz Xtal(See MX465 for 4MHz)` Low Voltage 3.3V to 5.0VApplication· Mobile Radio Channel Sharing· Scan Trunkin...
MX165C: Features: ` Meets TIA/EIA-603 Standards` 47 CTCSS Tones + Notone` TX/RX Speech Filters` Improved Sinad` Serial or Parallel Programming` Easy P Interface` Scanning on any Channel` Standard 1MHz Xtal(...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
General | Min. | Max. | Units |
Supply (VDD - VSS) | -0.3 | 7.0 | V |
Voltage on any pin to VSS | -0.3 | VDD + 0.3 | V |
Current | |||
VDD | -30 | 30 | mA |
VSS | -30 | 30 | mA |
Any other pins | -20 | 20 | mA |
TN / DW / LH / DIP Package | |||
Total Allowable Device Dissipation at TAMB = 25 | 800 | mW | |
Derating above 25 | 10 | mW/ above 25 | |
Storage Temperature | -55 | 125 | |
Operating Temperature | -40 | 85 |
The MX165C CTCSS Encoder/Decoder is a low voltage, CMOS device that meets TIA/EIA-603 Standards. The MX165C will encode and decode the tones 159.8Hz, 183.5Hz, 189.9Hz, 196.6Hz, 199.5Hz, 206.5Hz, 229.1Hz, and 254.1Hz in addition to the 39 standard CTCSS tones, for a total of 47 CTCSS tones + Notone. With the incorporation of the on-chip TX and RX speech filter, the MX165C enhances voice/tone multiplexing by attenuating TX and RX speech 36dB at frequencies below 250Hz while passing signals > 300Hz with only 1dB of ripple. This not only minimizes CTCSS talk-off in the TX mode but also improves Hum and Noise performance in the RX mode.
Available in the following package styles: 24-pin TSSOP (MX165CTN), 24-pin SOIC (MX165CDW), 24-pin PLCC (MX165CLH), and 24-pin PDIP (MX165CP), the MX165C requires a single 3.3V to 5.0V supply and a 1MHz clock or crystal.