DescriptionThe MTC50150-TB-C2 is designed as a low cost ADSL bridge and LAN router. One 10/100Mbits Ethernet port allows the connection of a LAN to the WAN in bridged or routed mode. The data traffic can be routed through a local terminal by using the LAN port. The presence of NAT and DHCP and the...
MTC50150-TB-C2: DescriptionThe MTC50150-TB-C2 is designed as a low cost ADSL bridge and LAN router. One 10/100Mbits Ethernet port allows the connection of a LAN to the WAN in bridged or routed mode. The data traffi...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The MTC50150-TB-C2 is designed as a low cost ADSL bridge and LAN router. One 10/100Mbits Ethernet port allows the connection of a LAN to the WAN in bridged or routed mode. The data traffic can be routed through a local terminal by using the LAN port. The presence of NAT and DHCP and the API slots for firewall functions allow for a high-speed connection of LAN connected devices, like PC, to the public Internet in an isolated and secure environment.
It has many features about MTC50150-TB-C2 hardware. (1)ARM946ES RISC processor dedicated to network processing, API and DSL modem control. (2)Hardware ATM processor: SAR function with AAL5 processing. (3)Hardware packet processor: Ethernet MAC, learning and filter bridge. (4)One 10/100 base-T ethernet MACs with MII interface for external PHY or multi-port switch. (5)One 8 or 16-bit wide Flash port, ISA compatible for up to 16Mbyte addressable memory. (6)One 32-bit wide SDRAM interface with 32Mbyte addressable memory. (7)Interface to MTC20174 DynaMiTe ADSL analog front end (AFE) chip. (8)Multi-channel DMA engine integrated with peripherals. (9)Low power: 1.8V +/-10% core voltage, 3.3V +/- 10% I/O voltage. (10)128 instructions (32 bits) of boot ROM. (11)GPIO with support LED. (12)Cc-based Multi ICE/compiler support with assembler and debugger. (13)Software chip and system simulators for software development and debug. (14)JTAG board-level test interface. (15)140MHz system clock (processor cycle clock). (16)Sleep mode with wake on LAN wake on WAN feature. (17)Programmable system frequency clock: 140, 105, 70, 35 and 129MHz (fall back mode).
Also the MTC50150-TB-C2 is organized in 5 clusters. (1)User interface API. (2)System services. (3)Network services. (4)TCP/IP socket. (5)ATM encapsulation. Those are all the clusters. And so on. At present we have not got so much information about this IC and we would try hard to get more information about MTC50150-TB-C2. If you have any question or suggestion or want to know more information please contact us for details. Thank you!