MT9T001P12STC

Series: -
Type: CMOS Imaging
Active Pixel Array: 2048H x 1536V
Manufacturer: Aptina LLC
Packaging: Bulk
Pixel Size: 3.2µm x 3.2µm
Frames per Second: 12 ~ 93
Voltage - Supply: 3 V ~ 3.6 V
Package / Case: 48-PLCC
Supplier Device Package: 48-PLCC (14.22x14.22)


Features:

• DigitalClarity™ Image sensor technology
• High frame rate
• Global reset release
• Horizontal and vertical binning
• Column and row skip modes
• Superior low-light performance
• Low dark current
• Simple two-wire serial interface
• Programmable controls: Gain, frame rate, frame size, exposure
• Pin-for-pin compatible with Micron's 1.3-megapixel MT9M001 and 2-megapixel MT9D001


Application

• Digital still cameras
• Digital video cameras
• Converged DSCs/camcorders


Pinout




Specifications

Symbol	Parameter	Rating		Unit
		Min	Max
TOP	Operating temperature	0	60
TST	Storage temperature	-40	125

Note: 1Stresses greater than those listed may cause permanent damage to the device. This is a
stress rating only, and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is not implied. Exposure
to absolute maximum rating conditions for extended periods may affect reliability.

Description

The Micron® Imaging MT9T001P12STC is a QXGA-format 1/2- inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2,048H x 1,536V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode. MT9T001P12STC is programmable through a simple twowire serial interface. The 3-megapixel CMOS image sensor features Digital- Clarity-Micron's breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. The sensor MT9T001P12STC can be operated in its default mode or programmed by the user for frame size, exposure, gain setting, and other parameters. The default mode outputs a QXGA image at 12 frames per second (fps). An onchip analog-to-digital converter (ADC) provides 10 bits per pixel. FRAME_VALID and LINE_VALID signals of MT9T001P12STC are output on dedicated pins, along with a pixel clock that is synchronous with valid data.

Parameters:

Technical/Catalog Information	MT9T001P12STC
Vendor	Aptina Imaging
Category	Sensors, Transducers
Pixel Size	3.2m x 3.2m
Active Pixel Array	2048H x 1536V
Frames per Second	93
Voltage - Supply	3.3V
Package / Case	48-PLCC
Packaging	Bulk
Type	CMOS Imaging
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	MT9T001P12STC MT9T001P12STC 557 1164 ND 5571164ND 557-1164