MSP430F1611IPM

Operating Temperature Range :
Core : MSP430
Data Bus Width : 16 bit
On-Chip ADC : Yes
Operating Supply Voltage : 1.8 V to 3.6 V
Mounting Style : SMD/SMT
Package / Case : LQFP-64
Processor Series : 1 Series
Maximum Clock Frequency : 8 MHz
Program Memory Size : 48 KB
Data RAM Size : 10 KB


Pinout




Description

The MSP430F1611IPM is a CMOS low-cost stereo Analog-to-Digital Converter (ADC) using the Philips bitstream conversion technique. The features of MSP430F1611IPM are: (1)Low Supply-Voltage Range, 1.8 V to 3.6 V; (2)Ultralow-Power Consumption: Active Mode: 330 A at 1 MHz, 2.2 V, Standby Mode: 1.1 A, Off Mode (RAM Retention): 0.2 A; (3)Five Power-Saving Modes; (4)Wake-Up From Standby Mode in less than 6 s; (5)16-Bit RISC Architecture, 125-ns Instruction Cycle Time; (6)Three-Channel Internal DMA; (7)12-Bit A/D Converter With Internal Reference, Sample-and-Hold and Autoscan Feature.

The following is about the absolute maximum ratings of MSP430F1611IPM: (1)Supply voltage during program execution, VCC (AVCC = DVCC = VCC): 1.8V min and 3.6 V max; (2)Supply voltage during flash memory programming, VCC(AVCC = DVCC = VCC): 2.7 V min and 3.6 V max; (3)Supply voltage during program execution, SVS enabled, VCC (AVCC = DVCC = VCC): 2 V min and 3.6 V max; (4)Supply voltage, VSS (AVSS = DVSS = VSS): 0 V; (5)Operating free-air temperature range, TA: -40 to 85 °C.

The electrical characteristics of the MSP430F1611IPM are: (1)Positive-going input threshold voltage: 1.5V min and 1.98V max at VCC = 3 V; (2)Negative-going input threshold voltage: 0.4V min and 0.9V max at VCC = 2.2 or 0.9V min and 1.3V max at VCC = 3V; (3)Input voltage hysteresis (VIT+ . VIT.): 0.3V min and 1.1V max at VCC = 2.2 V or 0.5V min and 1V max at VCC = 3 V.