MPXV5050G

The MPXV5050G series piezoresistive transducer is a stateoftheart monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A/D inputs. This patented, single element transducer combines advanced micromachining techniques,thinfilm metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

The MPXV5050G has the following features include:(1)2.5% maximum error over 0°to 85°C; (2)ideally suited for microprocessor or microcontroller-based systems; (3)temperature compensated over -40°to +125°C; (4)patented silicon shear stress strain gauge; (5)durable epoxy unibody element; (6)easy-to-use chip carrier option.The MPXV5050G series pressure sensor operating characteristics, and internal reliability and qualification tests are based on use of dry air as the pressure media. Media,other than dry air, may have adverse effects on sensor performance and longterm reliability. Contact the factory for information regarding media compatibility in your application.

The absolute maximum ratings of the MPXV5050G are:(1)operating temperature:-40 to +125°C;(2)storage temperature: -40 to +125°C;(3)maximum pressure:200kPa.Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,and specifically disclaims any and all liability,including without limitation consequential or incidental damages."Typical" parameters can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed,intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life,or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur.