Features: • 2.0 V to 6.8 V Continuous Operation• Output Current 1.0 A (DC), 3.0 A (Peak)• MOSFETs < 600m RDS(ON) @ 25°C Guaranteed• 3.0 V/5.0 V TTL-/CMOS-Compatible Inputs• PWM Frequencies up to 200 kHz• Undervoltage ShutdownSpecifications Rating Sy...
MPC17517: Features: • 2.0 V to 6.8 V Continuous Operation• Output Current 1.0 A (DC), 3.0 A (Peak)• MOSFETs < 600m RDS(ON) @ 25°C Guaranteed• 3.0 V/5.0 V TTL-/CMOS-Compatible Inputs...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Value |
Unit |
Motor Supply Voltage |
VM |
-0.5 to 8.0 |
V |
Charge Pump Output Voltage |
VCRES |
-0.5 to 14 |
V |
Logic Supply Voltage |
VDD |
-0.5 to 7.0 |
V |
Signal Input Voltage |
VIN |
-0.5 to VDD+0.5 |
V |
Driver Output Current Continuous Peak (Note 1) |
IO IOPK |
1.0 3.0 |
A |
ESD Voltage Human Body Model (Note 2) Machine Model (Note 3) |
VESD1 VESD2 |
±2000 ±100 |
V |
Storage Temperature Range |
TSTG |
-65 to 150 |
|
Operating Junction Temperature |
TJ |
-20 to 150 |
|
Operating Ambient Temperature |
TA |
-20 to 65 |
|
Thermal Resistance (Note 4) |
RJA |
190 |
/W |
Power Dissipation (Note 5) |
PD |
657 |
mW |
Soldering Temperature (Note 6) |
TSOLDER |
245 |
The 17517 is a monolithic triple totem-pole-output power IC designed to be used in portable electronic applications to control small DC motors and solenoids. The 17517 can operate efficiently with supply voltages as low as 2.0 V to as high as 6.8 V. Its low RDS(ON) totem-pole output MOSFETs (0.46 typical) can provide continuos drive currents of 1.0 A and handle peak currents up to 3.0 A. It is easily interfaced to low-cost MCUs via parallel 3.0 V- or 5.0 Vcompatible logic. The device can be pulse width modulated (PWM-ed) at up to 200 kHz.
The 17517 can drive two motors in two directions one at a time or drive one motor in two directions and one solenoid with synchronous rectification of freewheeling currents one at a time. Two-motor operation is accomplished by hooking one motor between OUTA and OUTB and hooking the other motor between OUTB and OUTC. Motor plus solenoid operation is accomplished by hooking a motor between OUTA and OUTB and a solenoid between OUTC and GND.
MPC17517 contains an integrated charge pump and level shifter (for gate drive voltages), integrated shoot-through current protection (cross-conduction suppression logic and timing), and undervoltage detection and shutdown circuitry.
The 17517 has four operating modes: Forward, Reverse, Brake, and Tri-Stated (High Impedance).