MOC8111

Current Transfer Ratio :
Maximum Collector Emitter Saturation Voltage : 0.4 V
Maximum Power Dissipation : 150 mW
Minimum Operating Temperature : - 55 C
Maximum Forward Diode Voltage : 1.5 V
Packaging : Tube
Maximum Operating Temperature : + 100 C
Input Type : DC
Maximum Collector Current : 150 mA
Maximum Collector Emitter Voltage : 30 V
Isolation Voltage : 5300 Vrms
Package / Case : PDIP-6


Application

• Appliances, Measuring Instruments
• Regulation and Feedback Control
• Programmable Controllers
• Interfacing and coupling systems of different potentials and impedances
• General Purpose Switching Circuits
• High Noise Environments




Pinout






Specifications

Rating	Symbol	Value	Unit
INPUT LED
Reverse Voltage	VR	6	Volts
Forward Current - Continuous	IF	60	mA
LED Power Dissipation @ TA = 25°C with Negligible Power in Output Detector Derate above 25°C	PD	120 1.41	mW mW/°C
OUTPUT TRANSISTOR
CollectorEmitter Voltage	VCEO	30	Volts
EmitterCollector Voltage	VECO	7	Volts
Collector Current - Continuous	IC	150	mA
Detector Power Dissipation @ TA = 25°C with Negligible Power in Input LED Derate above 25°C	PD	150 1.76	mW mW/°C
TOTAL DEVICE
Isolation Surge Voltage Peak ac Voltage(1), 60 Hz, 1 Second Duration	VISO	7500	Vac(pk)
Total Device Power Dissipation @ TA = 25°C Derate above 25°C	PD	250 2.94	mW mW/°C
Ambient Operating Temperature Range(2)	TA	55 to +100	°C
Storage Temperature Range(2)	Tstg	55 to +150	°C
Soldering Temperature (10 sec, 1/16, from case)	TL	260	°C

1. Isolation surge voltage is an internal device dielectric breakdown rating.For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.

Preferred devices are Motorola recommended choices for future use and best overall value.GlobalOptoisolator is a trademark of Motorola, Inc.




Description

The MOC8111, MOC8112 and MOC8113 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector. The internal basetoPin 6 connection has been eliminated for improved noise immunity.