Application• Solenoid/Valve Controls• Lighting Controls• Static Power Switches• AC Motor Drives• Temperature Controls• E.M. Contactors• AC Motor Starters• Solid State RelaysSpecifications Rating Symbol Value Unit INFRARED EMITTING ...
MOC3062: Application• Solenoid/Valve Controls• Lighting Controls• Static Power Switches• AC Motor Drives• Temperature Controls• E.M. Contactors• AC Motor Starters...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Value |
Unit |
INFRARED EMITTING DIODE | |||
Reverse Voltage |
VR |
6 |
Volts |
Forward Current - Continuous |
IF |
60 |
mA |
Total Power Dissipation @ TA = 25°C Negligible Power in Transistor Derate above 25°C |
PD |
120 1.41 |
mW mW/ |
OUTPUT DRIVER | |||
OffState Output Terminal Voltage |
VDRM |
400 |
Volts |
Peak Repetitive Surge Current (PW = 1 ms, 120 pps) |
ITSM |
1 |
A |
Total Power Dissipation @ TA = 25°C Derate above 25°C |
PD |
150 1.76 |
mW mW/ |
TOTAL DEVICE | |||
Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 Second Duration) |
VISO |
7500 |
Vac(pk) |
Total Power Dissipation @ TA = 25°C Derate above 25°C |
PD |
250 2.94 |
mW mW/ |
Junction Temperature Range |
TJ |
40 to +100 |
|
Ambient Operating Temperature Range (2) |
TA |
40 to +85 |
|
Storage Temperature Range(2) |
Tstg |
40 to +150 |
|
Soldering Temperature (10 s) |
TL |
260 |
The MOC3061, MOC3062 and MOC3063 devices consist of gallium arsenide infrared emitting diodes optically coupled to monolithic silicon detectors performing the functions of Zero Voltage Crossing bilateral triac drivers. MOC3061, MOC3062 and MOC3063 are designed for use with a triac in the interface of logic systems to equipment powered from 115/240 Vac lines, such as solidstate relays, industrial controls, motors, solenoids and consumer appliances, etc.
• Simplifies Logic Control of 115/240 Vac Power
• Zero Voltage Crossing
• dv/dt of 1500 V/ms Typical, 600 V/ms Guaranteed
• To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option.