Application• Solenoid/Valve Controls• Lighting Controls• Static Power Switches• AC Motor Drives• Temperature Controls• E.M. Contactors• AC Motor Starters• Solid State RelaysSpecifications Rating Symbol Value Unit INFRARED EMITTING ...
MOC3042: Application• Solenoid/Valve Controls• Lighting Controls• Static Power Switches• AC Motor Drives• Temperature Controls• E.M. Contactors• AC Motor Starters...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Value |
Unit |
INFRARED EMITTING DIODE | |||
Reverse Voltage |
VR |
6 |
Volts |
Forward Current - Continuous |
IF |
60 |
mA |
Total Power Dissipation @ TA = 25°C Negligible Power in Transistor Derate above 25°C |
PD |
120 1.41 |
mW mW/ |
OUTPUT DRIVER | |||
OffState Output Terminal Voltage |
VDRM |
400 |
Volts |
Peak Repetitive Surge Current (PW = 1 ms, 120 pps) |
ITSM |
1 |
A |
Total Power Dissipation @ TA = 25°C Derate above 25°C |
PD |
150 1.76 |
mW mW/ |
TOTAL DEVICE | |||
Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 Second Duration) |
VISO |
7500 |
Vac(pk) |
Total Power Dissipation @ TA = 25°C Derate above 25°C |
PD |
250 2.94 |
mW mW/ |
Junction Temperature Range |
TJ |
40 to +100 |
|
Ambient Operating Temperature Range (2) |
TA |
40 to +85 |
|
Storage Temperature Range(2) |
Tstg |
40 to +150 |
|
Soldering Temperature (10 s) |
TL |
260 |
The MOC3041, MOC3042 and MOC3043 devices consist of gallium arsenide infrared emitting diodes optically coupled to a monolithic silicon detector performing the function of a Zero Voltage Crossing bilateral triac driver. MOC3041, MOC3042 and MOC3043 are designed for use with a triac in the interface of logic systems to equipment powered from 115 Vac lines, such as solidstate relays, industrial controls, motors, solenoids and consumer appliances, etc.
• Simplifies Logic Control of 115 Vac Power
• Zero Voltage Crossing
• dv/dt of 2000 V/ms Typical, 1000 V/ms Guaranteed
• To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option. Recommended for 115/240 Vac(rms) Applications: