Features: ·Single 4.8 V power supply·Choice of camera and VCR modes, so that both the camera and VCR portions of a video camera with 510 horizontal pixels can use the same MN38662S for signal processingApplication· Video camerasPinoutDescriptionThe MN38662S is a CCD signal delay element for video ...
MN38662S: Features: ·Single 4.8 V power supply·Choice of camera and VCR modes, so that both the camera and VCR portions of a video camera with 510 horizontal pixels can use the same MN38662S for signal proces...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The MN38662S is a CCD signal delay element for video signal processing applications.
It contains such components as a threefold-frequency circuit, a shift register clock driver, charge I/O blocks, two CCD analog shift registers switchable between 681 and 605 stages, a clamp bias circuit, resampling output amplifiers, and booster circuits.
When the switch input is "L" level, the MN38662S samples the input using the supplied clock signal with a frequency of three times the NTSC color signal subcarrier frequency (3.579545 MHz) and, after adding in the attached filter delay, produces independent delays of 1 H (the horizontal scan period) each for the two lines. When the switch input is "H" level, the MN38662S disables the threefold-frequency circuit and samples the input with the image sensor drive frequency (9.53496 MHz or 9.545454 MHz) for the camera's 510 horizontal pixels and, after adding in the attached filter delay, produces independent delays of 1 H (the horizontal scan period) each for the two lines.