Features: SpecificationsDescriptionMN3611 is a 2160-pixel high sensitivity CCD linear image sensor combining photo-sites using low dark output floating photodiodes and CCD analog shift registers for read out. There are some features of MN3611 as follows. First, 2160 floating photodiodes and n-ch...
MN3611: Features: SpecificationsDescriptionMN3611 is a 2160-pixel high sensitivity CCD linear image sensor combining photo-sites using low dark output floating photodiodes and CCD analog shift registers for...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
MN3611 is a 2160-pixel high sensitivity CCD linear image sensor combining photo-sites using low dark output floating photodiodes and CCD analog shift registers for read out.
There are some features of MN3611 as follows. First, 2160 floating photodiodes and n-channel buried type CCD analog shift registers for read out are intergrated in a single chip. Secondly, extremely highh sensitivity has been obtained by employing an on-chip voltage amplifier circuit. Besides, use of photodiodes with a new structure has made the dark output voltage very low. Furthermore, all the input pulses can be driven by CMOS 5V-type logics. The fifth is a smooth spectral characteristic that is close to the sensitivity of the human eye in the entire visible regon. The sixth is large signal output of typically 1700 mV at saturation. The last one is operation with a single +12 V positive power supply.
What comes next is about the absolute maximum ratings of MN3611(Ta=25). The VDD (supply voltage) is from -0.3 to +15 V. The VI (input pin voltage) is from -0.3 to +15 V. The VO (output pin voltage) is from -0.3 to +15 V. The storage temperature is from -40 to +100. The operating temperature is from -25 to +60. Then is about the operating voltage conditions (Ta=-25 to +60, VSS=0 V). The minimum VDD (power supply voltage) is 11.4 V, the typical is 12.0 V and the maximum is 13.0 V. The minimum H (CCD shift register clock high level) is 4.5 V, the typical is 5.0 V and the maximum is 5.5 V. The minimum L (CCD shift register clock low level) is 0 V, the typical is 0.2 V and the maximum is 0.5 V.