MN103004J

The MN103004J is a very good product. There is some information about the specifications of MN103004J: (1)ROM (*64 bit): 192K; (2)RAM (*32 bit): 4K; (3)minimum instruction execution time: 30 ns (at 2.2 V, 33 MHz) and 25 ns (at 3.0 V, 40 MHz); (4)interrupts: RESET, IRQ*8, NMI*1, timer*22, input capture*14, PWM*4, SIF*16, DMAC*4, WDT, A/D and system error; (5)serial interface: serial 0: 7-, 8 bit*2 (clock synchronous mode, start-stop synchronous mode, I2C mode); serial 2: 7-, 8 bit*1 (start-stop synchronous mode); serial 3 to 7: 7-, 8 bit*5 (clock synchronous mode): clock source: (clock synchronous mode, start-stop synchronous mode): IOCLK, underflow of timer counter, external clock; (I2C mode): IOCLK, underflow of timer counter; (6)A/D inputs: 10 bit*16 ch; (7)PWM: 12-, 14 bit resolution*4 ch (dedicated), 16 bit resolution*2 ch (common with timer) ; (8)ICR: 28 bit*13 ch + 16 bit*4 ch (common with OCR); (9)OCR: 16 bit*4 ch (common with timer); (10)timer synchronous output: 4 bit (synchronous output)*2 ch; (11)DMA controller: number of channels: 4; unit of transfer: 8/16/32 bits; max transfer cycles: 65536; starting factor: external request, timer factor, PNM factor, serial transmission/reception factor, A/D conversion finish, software factor; transfer method: 2-bus cycle transfer; addressing modes: fixed, increment, decrement; transfer mode: word transfer, burst transfer, intermittent transfer;

The following is about the electrical characteristics of MN103004J(at VDD=5 V) of the supply current: (1)operating supply current, IDD1: 150 mA max when VDDH, VDDB, VDD, PVDD, AVDD=3.0 V, VI=VDDH (VDDB) or VSS, at internal=40 MHz, output released; (2)supply current at stopping, IDD2: 150A max when VDDH, VDDB, VDD, PVDD, AVDD=3.0 V, VI=VDDH (VDDB) or VSS, fosc=oscillation stopped, output released.

The last one is about the electrical characteristics of MN103004J (at VDD=5 V) of the A/D conversion performance: (1)resolution: 10 bits; (2)A/D conversion absolute error: ±7 LSB max at VREF+=3.0 V, A/D conversion clock=5 MHz; (3)A/D conversion absolute error: ±5 LSB max at VREF+=3.0 V, A/D conversion clock=5 MHz; (4)A/D conversion time: 2.8s min.