MM74C374

` Wide supply voltage range: 3V to 15V
` High noise immunity: 0.45 V_CC (typ.)
` Low power consumption
` TTL compatibility: Fan out of 1driving standard TTL
` Bus driving capability
` 3-STATE outputs
` Eight storage elements in one package
` Single CLOCK/LATCH ENABLE and OUTPUT DISABLE control inputs
` 20-pin dual-in-line package with 0.300" centers takes half the board space of a 24-pin package

The MM74C373 and MM74C374 are integrated, complementary MOS (CMOS), 8-bit storage elements with 3-STATE outputs. These outputs have been specially designed to drive high capacitive loads, such as one might find when driving a bus, and to have a fan out of 1 when driving standard TTL. When a high logic level of MM74C374 is applied to the OUTPUT DISABLE input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements.

The MM74C373 is an 8-bit latch. When LATCH ENABLE is high, the Q outputs will follow the D inputs. When LATCH ENABLE goes low, data at the D inputs, which meets the set-up and hold time requirements, will be retained at the outputs until LATCH ENABLE returns high again.

The MM74C374 is an 8-bit, D-type, positive-edge triggered flip-flop. Data at the D inputs, meeting the set-up and hold time requirements, is transferred to the Q outputs on positive- going transitions of the CLOCK input.