Features: • Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times• Constant frequency operation to 500kHz• Current mode operation• Cycle-by-cycle current limiting with integrating fault detection and restart delay• Precision...
ML4818_1245300: Features: • Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times• Constant frequency operation to 500kHz• Current mode operation•...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Absolute Maximum Ratings are those values, beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Parameter | Min. | Max. | Units |
VCC | 30 | V | |
Output Driver Current, Source or Sink DC Pulse (0.5 µs) |
0.5 1.5 |
A A | |
Analog Inputs (CT, RAMP, ILIM, E/A OUT, INV, SOFT START, RCRESET) |
0.3 | 6 | V |
CLOCK Output Current (RT) | -5 | mA | |
Error Amplifier Output Current (E/A OUT) | 5 | mA | |
SOFT START Sink Current | 50 | mA | |
Oscillator Charging Current (CT) | -5 | mA | |
Junction Temperature | 150 | ||
Storage Temperature Range | 65 | 150 | |
Lead Temperature (Soldering 10 Sec) | 260 | ||
Thermal Resistance (JA) Plastic Power DIP |
40 | /W |
The ML4818_1245300 is a complete phase modulation control IC suit-able for full bridge soft switching converters. Unlike conven-tional PWM circuits, the phase modulation technique allows for zero-voltage switching transitions and square wave drive across the transformer. The IC ML4818_1245300 modulates the phases of the two sides of the bridge to control output power.
The ML4818_1245300 can be operated in current mode. The delay times for the outputs are externally programmable to allow the zero-voltage switching transitions to take place.
Pulse-by-pulse current limit, integrating fault detection, and soft start reset are provided. The under-voltage lockout cir-cuit of ML4818_1245300 features a 6V hysteresis with a low starting current to allow off-line start up with a low power bleed resistor. A shutdown function powers down the IC, putting it into a low quiescent state.