Features: • Packaged in 28 pin SSOP (QSOP)• Ideal for systems using Oak's MPEG decoders• On-chip patented VCXO with pull range of 200ppm• VCXO tuning voltage of 0 to 3 V• Processor frequencies include 33.3, 40, 50, 66.6, 81, and 100 MHz• Audio clocks of 8.192 MH...
MK2771-15: Features: • Packaged in 28 pin SSOP (QSOP)• Ideal for systems using Oak's MPEG decoders• On-chip patented VCXO with pull range of 200ppm• VCXO tuning voltage of 0 to 3 V̶...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs and Clock Outputs | Referenced to GND |
-0.5 |
VDD+0.5V |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
Soldering Temperature | Max of 10 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The MK2771-15 is a low cost, low jitter, high performance VCXO and clock synthesizer designed for set-top boxes. The on-chip Voltage Controlled Crystal Oscillator MK2771-15 accepts a 0 to 3V input voltage to cause the output clocks to vary by ±100 ppm. Using ICS/MicroClock's patented VCXO and analog Phase-Locked Loop (PLL) techniques, MK2771-15 uses an inexpensive 13.5 MHz pullable crystal input of MK2771-15 to produce multiple output clocks including two selectable processor clocks, a selectable audio clock, two communications clocks, and three fixed clocks. All clocks are frequency locked to the 27.00MHz output (and to each other) with zero ppm error, so any output can be used as the VCXO output.