Features: • Packaged in 8 pin narrow SOIC• Uses an inexpensive 13.500 MHz external crystal• On-chip VCXO (patented) with pull range of 200ppm (minimum)• VCXO tuning voltage of 0 to 3V• 25mA output drive capability at TTL levels• Advanced, low power, sub-micron C...
MK2727: Features: • Packaged in 8 pin narrow SOIC• Uses an inexpensive 13.500 MHz external crystal• On-chip VCXO (patented) with pull range of 200ppm (minimum)• VCXO tuning voltage o...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Conditions |
Minimum |
Typical |
Maximum |
Units |
Supply Voltage, VDD | Referenced to GND |
7 |
V | ||
Inputs and Clock Outputs | Referenced to GND |
-0.5 |
VDD+0.5V |
V | |
Ambient Operating Temperature |
0 |
70 |
|||
Soldering Temperature | Max of 20 seconds |
260 |
|||
Storage temperature |
-65 |
150 |
The MK2727 is MicroClock's lowest cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive 27MHz VCXOs. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3V input voltage to cause the output clocks to vary by ±100 ppm. Using MicroClock's patented VCXO and analog Phase- Locked Loop (PLL) techniques, MK2727 uses an inexpensive external 13.5 MHz pullable crystal input to produce a 27 MHz output clock.
MicroClock manufactures the largest variety of Set-Top Box and multimedia clock synthesizers for all applications. If more clock outputs of MK2727 are needed, see the MK2731 or MK277x family of parts. Consult MicroClock to eliminate VCXOs, crystals and oscillators from your board.