Features: • Packaged in 28 pin, 150 mil wide SSOP• Provides all critical timing for OPTi ACPI Firestar and Firestar+• Early Host clock of 3.5ns• Separate VDD and skew adjust for Host 5,6, and 7supports field upgrade to Firestar+ and new 2.5V processors • 48MHz USB, 24...
MK1491-14: Features: • Packaged in 28 pin, 150 mil wide SSOP• Provides all critical timing for OPTi ACPI Firestar and Firestar+• Early Host clock of 3.5ns• Separate VDD and skew adjust ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Paramete |
Conditions |
Minimum |
Typical |
Maximum |
Units |
ABSOLUTE MAXIMUM RATINGS (note 1) | |||||
Supply voltage, VDD |
Referenced to GND |
7 |
V | ||
Inputs and Clock Outputs |
Referenced to GND |
-0.5 |
VDD+0.5 |
V | |
Ambient Operating Temperature |
0 |
70 |
°C | ||
Soldering Temperature |
Max of 10 seconds |
260 |
°C | ||
Storage temperature |
-65 |
150 |
°C |
The MK1491-14 is a low cost, low jitter, high performance clock synthesizer for OPTi's Firestar and Firestar+ chipsets for Pentium™ Processor-based mobile computer applications.
Using analog Phase-Locked Loop (PLL) techniques, MK1491-14 uses a 14.318 MHz crystal input to produce multiple output clocks up to 75 MHz. It provides selectable Host and PCI local bus clocks as well as selectable clocks for Super
I/O or Universal Serial Bus (USB). MK1491-14 has up to seven Host output clocks.
The chip of MK1491-14 has three different power down modes that reduce power on various clocks.