Features: · 5-volt only operation (+10%)· Fit and functionally compatible to industry standard transceiver· Idle low transmitter inputs and receiver outputs· Dual-channel 50-mil center 24-lead Flatpack· Dual-channel 100-mil center 36-pin DIP· ...
MIL-STD-1553A: Features: · 5-volt only operation (+10%)· Fit and functionally compatible to industry standard transceiver· Idle low transmitter inputs and receiver outputs· ⣷...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionITT Cannon has developed a line of filter connectors to meet the industry's demand fo i...
Features: SpecificationsDescriptionThe PV connector is designed to meet the rugged requirements of...
PARAMETER |
LIMITS |
UNIT |
VCC |
-0.3 to +7.0 |
V |
Input voltage range (receiver) |
10 |
VPP, L-L |
Logic input voltage range |
-0.3 to +5.5 |
V |
Power dissipation 100% duty cycle (per channel) |
3.6 |
W |
Thermal impedance junction to case2 |
6.0 |
/W |
Maximum junction temperature |
+175 |
|
Storage temperature |
-65 to +150 |
|
Receiver common mode input voltage range |
-5.0 to +5.0 |
V |
The monolithic UT63M147 Transceivers are complete transmitter and receiver pairs for MIL-STD-1553A and 1553B applications. Encoder and decoder interfaces are idle low.
The receiver MIL-STD-1553A section of the UT63M147 series accepts biphasemodulated Manchester II bipolar data from a MIL-STD-1553 data bus and produces TTL-level signal data at its RXOUT and RXOUT outputs. An external RXEN input enables or disables the receiver outputs.
The transmitter MIL-STD-1553A section accepts biphase TTL-level signal data at its TXIN and TXIN and produces MIL-STD-1553 data signals. The transmitter's output voltage is typically 12 VPP, L-L. Activating the TXIHB input or setting both data inputs to the same logic level disables the transmitter outputs.
The UT63M14x series MIL-STD-1553A offers complete transmitter and receiver pairs packaged in a dual-channel 36-pin DIP or 24-lead flatpack configurations designed for use in any MIL-STD-1553 application.