Series: -
Configuration: Low-Side
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
High Side Voltage - Max (Bootstrap): -
Mounting Type: Surface Mount
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Supplier Device Package: 8-SOIC
Packaging: Tube
Number of Configurations: 1
Number of Outputs: 1
Voltage - Supply: 4.5 V ~ 18 V
Input Type: Non-Inverting
Operating Temperature: -40°C ~ 85°C
Delay Time: 15ns
Current - Peak: 9A
Manufacturer: Micrel Inc
DescriptionMIC4422BM MOSFET driver is rugged, efficient, and easy to use.It can replace three or more discrete components, reducing PCB area requirements, simplifying product design, and reducing assembly cost.MIC4422BM has many unique features: (1) BiCMOS/DMOS construction; (2) input will withstand negative swing of up to 5V; (3) matched rise and fall times is 25ns; (4) high peak output current is 9A Peak; (5) wide operating range is 4.5V to 18V; (6) high capacitive load drive is 47,000pF; (7) low delay time is 30ns Typ; (8) logic high input for any voltage from 2.4V to VS; (9) low equivalent input capacitance (typ) is 7pF; (10) low supply current is 450mA with logic 1 input,etc.
There are some absolute maximum ratings about MIC4422BM. (1): supply voltage is 20V; (2): input voltage is VS + 0.3V to GND 5V; (3): input current (VIN > VS) is 50 mA; (4): storage temperature is 65°C to +150°C; (5): lead temperature (10 sec) is 300°C.
There are some electrical characteristics of MIC4422BM: (TA = 25°C with VS between 4.5 V and 18 V unless otherwise specified.). Input: (1): logic 1 input voltage(VIH) is 2.4 V min and 1.3 V typ; (2): logic 0 input voltage(VIL) is 1.1 V typ and 0.8 V max; (3): input voltage range(VIN) is 5 V min and VS+0.3 V max; (4): input current(IIN,VIN is between 0 V and VS ) is 10 mA min and 10 mA max.Output: (1): high output voltage(VOH) is VS.025 V min; (2): low output voltage(VOL) is 0.025 V max; (3): output resistance,output high(RO,IOUT = 10 mA, VS = 18 V) is 0.6 ohms typ; (4): output resistance,output low(RO,IOUT = 10 mA, VS = 18 V) is 0.8 ohm typ and 1.7 ohm; (5): peak output current(IPK,VS = 18 V) is 9 A typ; (6): continuous output current(IDC) is 2 A min.
Parameters: | Technical/Catalog Information | MIC4422BM |
| Vendor | Micrel Inc |
| Category | Integrated Circuits (ICs) |
| Configuration | Low-Side |
| Voltage - Supply | 4.5 V ~ 18 V |
| Current - Peak | 9A |
| Delay Time | 15ns |
| Package / Case | 8-SOIC |
| Packaging | Tube |
| Number of Outputs | 1 |
| Input Type | Non-Inverting |
| Number of Configurations | 1 |
| Operating Temperature | -40°C ~ 85°C |
| High Side Voltage - Max (Bootstrap) | - |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | MIC4422BM
MIC4422BM
|
MIC4422BM Data Sheet
