DescriptionThe MIC29150/29300/29500/29750 are high current, high accuracy, low-dropout voltage regulators. Using Micrel's proprietary Super ßeta PNP™ process with a PNP pass element, these regulators feature 300mV to 370mV (full load) dropout voltages and very low ground current. Desig...
MIC29500: DescriptionThe MIC29150/29300/29500/29750 are high current, high accuracy, low-dropout voltage regulators. Using Micrel's proprietary Super ßeta PNP™ process with a PNP pass element, the...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe MIC2003 and MIC2013 are current limiting, high-side power switches that are designe...
The MIC29150/29300/29500/29750 are high current, high accuracy, low-dropout voltage regulators. Using Micrel's proprietary Super ßeta PNP™ process with a PNP pass element, these regulators feature 300mV to 370mV (full load) dropout voltages and very low ground current. Designed for high current loads, these devices also find applications in lower current, extremely low dropout-critical systems, where their tiny dropout voltage and ground current values are important attributes.The MIC29150/29300/29500/29750 are fully protected against overcurrent faults, reversed input polarity, reversed lead insertion, overtemperature operation, and positive and negative transient voltage spikes. Five pin fixed voltage versions feature logic level ON/OFF control and an error flag which signals whenever the output falls out of regulation. Flagged states include low input voltage (dropout), output current limit, overtemperature shutdown, and extremely high voltage spikes on the input.On the MIC29xx1 and MIC29xx2, the ENABLE pin may be tied to VIN if it is not required for ON/OFF control. The MIC29150/29300/29500 are available in 3- and 5-pin TO-220 and surface mount TO-263 packages. The MIC29750 7.5A regulators are available in 3- and 5-pin TO-247 packages.
Features of the TheMIC29150/29300/29500/29750 are: (1)HighCurrent Capability,MIC29150/29151/29152/29153:1.5A;MIC29300/29301/29302/29303:3A;MIC29500/29501/29502/29503:5A;MIC29750/29751/29752:7.5A(2)Low-Dropout Voltage:350mV at Full Load;(3)Low Ground Current;(4)Accurate 1% Guaranteed Tolerance;(5)Extremely Fast Transient Response;(6)Reverse-battery and "Load Dump" Protection;(7)Zero-Current Shutdown Mode (5-Pin versions);(8)Error Flag Signals Output Out-of-Regulation(5-Pin versions);(9)Also Characterized For Smaller Loads With Industry-Leading Performance Specifications;(10)Fixed Voltage and Adjustable Versions
The absolute maximum ratings of the The MIC29150/29300/29500/29750 can be summarized as:(1)Power Dissipation:Internally Limited;(2)Lead Temperature (Soldering, 5 seconds):260°C;(3)Storage Temperature Range:65°C to +150°C;(4)Input Supply Voltage:20V to +60V.