Features: • 2.5V to 10V input voltage range
• Output voltage up to 40V
• 1.2A switch current
• 600KHz PWM operation
• Trimmed 200mV feedback voltage
• Output over voltage protection (fixed or adjustable)
• PWM Brightness Control
• DAC Brightness Control
• <1% line regulation
• 1A shutdown current
• Over temperature protection
• UVLO
• 2.5mm x 2.5mm MLF™-10L package
• 40 to +125 junction temperature rangeApplication• PDAs
• GPS systems
• Smart phones
• Mini PCs
• Digital cameras
• IP phones
• LED flashlightsPinout
SpecificationsSupply voltage (VIN)........................................................12V
Switch voltage (VSW) ........................................ -0.3V to 50V
Enable pin voltage (VEN)....................................... -0.3 to VIN
FB Voltage (VFB).................................................................6V
VBRT ..................................................................................6V
Switch Current (ISW) .........................................................3A
Ambient Storage Temperature (TS)...............-65 to +150
ESD Rating (3)................................................................ .2KVDescriptionThe MIC2297 is a 600KHz PWM boost-switching regulator that is optimized for driving 6-10 series white LEDs. With its internal 40V switch and a guaranteed switch current of 1.2A, the MIC2297 easily drives a string of 10 white LEDs in series at 20mA, ensuring a high level of brightness and eliminating several ballast resistors.
The MIC2297 implements constant frequency 600KHz PWM control. The high frequency PWM operation saves board space by reducing external component sizes. The added benefit of the constant frequency PWM MIC2297 operation is much lower noise and input ripple injected back to the battery source than with variable frequency topologies.
To optimize efficiency, the feedback voltage of MIC2297 is set to 200mV. This reduced voltage reduces the power dissipation in the current set resistor, and allows the lowest total output voltage, hence minimal current draw from the battery.
The MIC2297 is available with output over-voltage protection that protects the IC and external components in case of open LED conditions.
The MIC2297 is available in low profile small size 2.5mm x 2.5mm MLF™-10L package. The MIC2297 has a junction temperature range of 40°C to +125°C.
MIC2297 Data Sheet
