MIC2010

Features:

• Compliant to USB power distribution specifications
• Two completely independent switches
• Integrated switching matrix supports ACPI S0/S3 state transitions without external FET circuits
• Make-before-break switching ensures glitch-free transitions
• No back-feed of auxiliary supply onto main supply during standby mode
• Bi-level current-limit preserves auxiliary supply voltage regulation in standby mode
• Thermally isolated channels
• Thermal shutdown protection
• Fault status outputs with filter prevents false assertions during hot-plug events
• Circuit breaker options with auto-reset (MIC2070)
• Undervoltage lockout


Application

• Desktop PCs
• Notebook PCs
• Notebook docking stations
• LAN Servers
• PC motherboard


Pinout




Specifications

Supply Voltage (V_IN) .................................... 0.3V to 6V
FAULT#, OUT1, OUT2 Output Pins ............... 0.3V to 6V
FAULT1,FAULT2, Output Current..............................25mA
ESD Rating, Note 3 ................................................... 2kV


Description

The MIC2010 is a dual channel USB power switch designed to support the power distribution requirements for USB Wakeup from the ACPI S3 state. The MIC2010 will directly switch its two outputs between a 5V main supply and a 5V auxiliary supply normally provided in ATX style power supplies.

The MIC2010 will adjust its current-limit threshold according to the ACPI state it is in. In the normal active ACPI S0 state the current-limit is set at 500mA minimum per channel satisfying the USB continuous output current specification. In the S3 state the current-limit of MIC2010 can be reduced to a value determined by an external resistor to minimize the current that is supplied by the auxiliary supply, thereby ensuring that voltage regulation is maintained even during fault conditions.

The MIC2010 provides make-before-break switching to ensure glitch-free transitions between the S3 and S0 states. Each channel of MIC2010 is also thermally isolated from the other so that a fault in one channel does not effect the other. FAULT status output signals are also provided indicating overcurrent and thermal shutdown conditions.

The MIC2070 option latches the output off upon detecting an overcurrent condition lasting for more than 5ms minimum. The output of MIC2010 can be reset by either toggling the EN inputs of the MIC2070-1/-2 or by removing the load. Latching the output off provides a circuit breaker mode of operation which reduces power consumption during fault conditions.