Features: • Single-Pole, Double-Throw Output• Broad Bandwidth: DC to 3ÊGHz• High Isolation: 37ÊdBÊTypical at 1ÊGHz• Fast Switching Time: 3ÊnsÊTypical• Ultra Low DC Power Consumption• Small Surface-Mount Plastic PackageSpecific...
MGS-71008: Features: • Single-Pole, Double-Throw Output• Broad Bandwidth: DC to 3ÊGHz• High Isolation: 37ÊdBÊTypical at 1ÊGHz• Fast Switching Time: 3Êns&Ec...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Units | Absolute Maximum[1] |
Maximum Input Power below 500 MHz above 500 MHz |
dBm | +27 +30 | |
Control Voltage | V | -8.0 | |
TSTG | Storage Temperature | °C | -8.0 |
The MGS-71008 is a single-pole, double-throw monolithic GaAs MMIC switch. The J2 and J3 of the MGS-71008 are terminated to ground by internal 50 W load resistors when "off" (a reflective version, the MGS-70008, which terminates the "off" port to ground, is also available). The switch is sealed in a small, plastic,surface-mount SO-8 package. Switching is actuated by a -5 V control voltage per the truth table shown on the next page. -3.3ÊV operation is also possible with some reduction in P1 dB and IP3.
The MGS-71008 is designed for high volume commercial applications where low insertion loss, high isolation, and fast switching speed are required. MGS-71008's low cost and high performance make it suitable for a wide variety of uses such as digital cellular, spread spectrum, GPS, and other RF switching applications. Refer to applications note AN-G007 for more application details.
The MGS-71008 is fabricated using HP's nominal 0.3Êmicron recessed Schottky-barrier-gate, gold metallization, and silicon nitride passivation to achieve excellent performance, uniformity, and reliability.