Features: • Ultra-Miniature Package• Internally Biased, Single +5 V Supply (14 mA)• 1.6 dB Noise Figure at 2.4 GHz• 21.8 dB Gain at 2.4 GHz• +3.1 dBm P1dB at 2.4 GHzApplication• LNA or Gain Stage for ISM, PCS, MMDS, GPS, TVRO, and Other C band ApplicationsPinout...
MGA-86563: Features: • Ultra-Miniature Package• Internally Biased, Single +5 V Supply (14 mA)• 1.6 dB Noise Figure at 2.4 GHz• 21.8 dB Gain at 2.4 GHz• +3.1 dBm P1dB at 2.4 GHzApp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Units | Absolute Maximum |
Vdd | Device Voltage, RF Output to Ground |
V | 9 |
Vin |
Range of RF Input Voltageto Ground | V | +0.5 -1.0 |
Pin | CW RF Input Power | dBm | +13 |
Tj | Junction Temperature | °C | 150 |
TSTG | Storage Temperature | °C | -65 to 150 |
Agilent's MGA-86563 is an economical, easy-to-use GaAs MMIC amplifier that offers low noise figure and excellent gain for applications from 0.5 to 6 GHz.
Packaged in an ultra-miniature SOT-363 package, MGA-86563 requires half the board space of the SOT-143.
The MGA-86563 may be used without impedance matching as a high performance 2 dB NF gain block. Alternatively, with the addition of a simple shunt-series inductor at the input, the device noise figure can be reduced to 1.6 dB at 2.4 GHz. For 1.5 GHz applications and above, the output is well matched to 50 W. Below 1.5 GHz, gain can be
increased by using conjugate matching.
The circuit of MGA-86563 uses state-of-the-art PHEMT technology with selfbiasing current sources, a sourcefollower interstage, resistive feedback, and on-chip impedance matching networks. A patented, on-chip active bias circuit allows operation from a single +5 V power supply. Current consumption of MGA-86563 is only 14 mA, making this part suitable for battery powered applications.