MCP6282

Features:

• Gain Bandwidth Product: 5 MHz (typ.)
• Supply Current: I_Q = 450 A (typ.)
• Supply Voltage: 2.2V to 5.5V
• Rail-to-Rail Input/Output
• Extended Temperature Range: -40to +125
• Available in Single, Dual and Quad Packages
• Single with Chip Select (CS) (MCP6283)
• Dual with Chip Select (CS) (MCP6285)




Application

• Automotive
• Portable Equipment
• Photodiode Amplifier
• Analog Filters
• Notebooks and PDAs
• Battery-Powered Systems




Specifications

Parameter NameValueTemp. Range (°C)-40°C to +125°C Vos Max (V)3000# per Package2Iq Typical (A)445Iq Max (A)570GBWP (kHz)5000Operating Voltage Range (V)2.2 to 6.0Device DescriptionLinear Op AmpsInput Voltage Noise Density (nV/rt(Hz))16PSRR Min (dB)70CMRR Min (dB)65Vos/Ta (uV/°C)1.7Ib (pA)1Aol (dB)110PM (deg)65Isc (mA)25Rail-to-RailIn/Out

Parameter Name	Value
Temp. Range (°C)	-40°C to +125°C
Vos Max (V)	3000
# per Package	2
Iq Typical (A)	445
Iq Max (A)	570
GBWP (kHz)	5000
Operating Voltage Range (V)	2.2 to 6.0
Device Description	Linear Op Amps
Input Voltage Noise Density (nV/rt(Hz))	16
PSRR Min (dB)	70
CMRR Min (dB)	65
Vos/Ta (uV/°C)	1.7
Ib (pA)	1
Aol (dB)	110
PM (deg)	65
Isc (mA)	25
Rail-to-Rail	In/Out

V_DD V_SS ........................................................................7.0V
All Inputs and Outputs ................... V_SS 0.3V to V_DD + 0.3V
Difference Input Voltage ...................................... |V_DD V_SS|
Output Short Circuit Current .................................Continuous
Current at Input Pins ...................................................±2 mA
Current at Output and Supply Pins ............................±30 mA
Storage Temperature.....................................-65 to +150
Junction Temperature (T_J) . .........................................+150
ESD Protection On All Pins (HBM;MM) ................ 4 kV;400V




Description

The Microchip Technology Inc. MCP6282 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 5 MHz Gain Bandwidth Product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.2V, while drawing 450 A (typ.) quiescent current. Additionally, the MCP6282 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300 mV to V_SS 300 mV. This family of operational amplifiers is designed with Microchip's advanced CMOS process.

The MCP6282 has aChip Select (CS) input for dual op amps in an 8-pin package. This device is manufactured by cascading the two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CSinput puts the device in Low-power mode.

The MCP6282 family operates over the Extended Temperature Range of -40 to +125. It also has a power supply range of 2.2V to 5.5V.