Specifications
| Temp. Range (°C) |
-40°C to +125°C |
| Vos Max (V) |
5000 |
| # per Package |
1 |
| Iq Typical (A) |
50 |
| Iq Max (A) |
70 |
| GBWP (kHz) |
550 |
| Operating Voltage Range (V) |
1.8 to 5.5 |
| Device Description |
Linear Op Amps |
| Input Voltage Noise Density (nV/rt(Hz)) |
45 |
| PSRR Min (dB) |
83 |
| CMRR Min (dB) |
60 |
| Vos/Ta (uV/°C) |
3 |
| Ib (pA) |
1 |
| Aol (dB) |
110 |
| PM (deg) |
77 |
| Isc (mA) |
23 |
| Rail-to-Rail |
In/Out |
DescriptionMCP6241 operational amplifier (Op Amp) provides wide bandwidth for the quiescent current. MCP6241 has a 650 kHz Gain Bandwidth Product (GBWP) and 77° (typ.) phase margin. This op amp operates from a single supply voltage as low as 1.8V, while drawing 50 A (typ.) quiescent current. In addition, the MCP6241 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD +300 mV to VSS -300 mV. This op amp is designed in one of Microchip's advanced CMOS processes. The MCP6241 operates in the Extended Temperature range of -40°C to +125°C. It has a power supply range of 1.8V to 5.5V.
The microchip technology inc.MCP6241 operational amplifiers (op amps) provide wide bandwidth for the quiescent current.The MCP6241 has a 550 kHz gain bandwidth product (GBWP) and 68°(typ.) phase margin.This family operates from a single supply voltage as low as 1.8V,while drawing 50A (typ.) quiescent current.In addition,the MCP6241 family supports rail-to-rail input and output swing,with a common mode input voltage range of VDD+300 mV to Vss-300mV.These op amps are designed in one of microchip's advanced CMOS processes.
The MCP6241 has 6 features.The first one is gain bandwidth product:550 kHz(typ.)The second one is supply current:IQ = 50A(typ.)The third one is supply voltage:1.8V to 5.5V.The fourth one is rail-to-rail input/output.The fifth one is extended temperature range :-40 to +125.The sixth one is available in 5-pin SC-70 and SOT-23 packages.
The MCP6241 has some absolute maximum ratings.The VDD-VSS is 7.0V.The all input and output is VSS-0.3V to VDD+0.3V.The difference input voltage is VDD-VSS.The output short circuit current is continuous.The current at input pins is ±2mA.The current at output and supply pins is ±30mA.The storage temperature is -65 to +150.The maximum junction temperature (TJ) is +150.The ESD protection on all pins (HBM;MM) is 4kV;300V.
MCP6241 Data Sheet
