MCP6234

Features:

`Gain Bandwidth Product: 300kHz (typ.)
`Supply Current: I_Q= 20|ìA (typ.
`Supply Voltage: 1.8V to 5.5V
`Rail-to-Rail Input/Output
`Extended Temperature Range: -40 to +125
`Available in 5-Pin SC-70 and SOT-23 packages

Application

·Automotive
·Portable Equipment
·Transimpedance amplifiers
·Analog Filters
·Notebooks and PDAs
·Battery-Powered Systems




Pinout






Specifications

Parameter Name	Value
Temp. Range (°C)	-40°C to +125°C
Vos Max (V)	5000
# per Package	4
Iq Typical (A)	20
Iq Max (A)	30
GBWP (kHz)	300
Operating Voltage Range (V)	1.8 to 6.0
Device Description	Linear Op Amps
Input Voltage Noise Density (nV/rt(Hz))	52
PSRR Min (dB)	83
CMRR Min (dB)	61
Vos/Ta (uV/°C)	3
Ib (pA)	1
Aol (dB)	110
PM (deg)	65
Isc (mA)	23
Rail-to-Rail	In/Out

Absolute Maximum Ratings †
V_DD V_SS ........................................................................7.0V
All Inputs and Outputs ................... V_SS 0.3V to V_DD + 0.3V
Difference Input Voltage ..................................... |V_DD V_SS|
Output Short Circuit Current ................................Continuous
Current at Input Pins ...................................................±2 mA
Current at Output and Supply Pins ............................±30 mA
Storage Temperature.................................-65°C to +150°C
Junction Temperature (T_J) . .......................................+150°C
ESD Protection On All Pins (HBM/MM) ................. 4 kV/400V

† Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied Exposure to maximum rating conditions for extended periodsmay affect device reliability.




Description

The Microchip Technology Inc. MCP6234 operational amplifiers (op amps) provide wide bandwidth for the quiescent current. The MCP6231/1R/1U/2/4 family has a 300 kHz gain bandwidth product and 65°C (typical) phase margin. This family operates from a single supply voltage as low as 1.8V, while drawing 20 A (typical) quiescent current. In addition, the MCP6234 family supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS 300mV. These op amps are designed in one of Microchip's advanced CMOS processes