Position: Home  > All Categories> Integrated Circuits (ICs) > MCP23008

MCP23008

Features: • 8-bit remote bidirectional I/O port - I/O pins default to input• High-speed I2C™ interface (MCP23008) - 100kHz - 400kHz - 1.7MHz• High-speed SPI™ interface (MCP23S08) - 10MHz• Hardware address pins - Three for the MCP23008 to allow up to eight device...

product image

MCP23008 Picture
See larger image
SeekIC No. : 004418243 Detail

MCP23008: Features: • 8-bit remote bidirectional I/O port - I/O pins default to input• High-speed I2C™ interface (MCP23008) - 100kHz - 400kHz - 1.7MHz• High-speed SPI™ interface ...

MCP23008 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
MCP23008
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/27

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• 8-bit remote bidirectional I/O port - I/O pins default to input
• High-speed I2C™ interface (MCP23008) - 100kHz - 400kHz - 1.7MHz
• High-speed SPI™ interface (MCP23S08) - 10MHz
• Hardware address pins - Three for the MCP23008 to allow up to eight devices on the bus - Two for the MCP23S08 to allow up to four devices using the same chip-select
• Configurable interrupt output pin - Configurable as active-high, active-low or open-drain
• Configurable interrupt source - Interrupt-on-change from configured defaults or pin change
• Polarity Inversion register to configure the polarity of the input port data
• External reset input
• Low standby current: 1 A (max.)
• Operating voltage:
- 1.8V to 5.5V @ -40°C to +85°C (I-Temp)
- 2.7V to 5.5V @ -40°C to +85°C (I-Temp)
- 4.5V to 5.5V @ -40°C to +125°C (E-Temp)




Pinout

Connection Diagram




Specifications

Ambient temperature under bias........................................................................................-40°C to +125°C
Storage temperature ..........................................................................................................-65°C to +150°C
Voltage on VDD with respect to VSS .................................................................................... ....-0.3V to +5.5V
Voltage on all other pins with respect to VSS (except VDD)...............................................-0.6V to (VDD + 0.6V)
Total power dissipation (Note) ..............................................................................................................700 mW
Maximum current out of VSS pin ..............................................................................................................150 mA
Maximum current into VDD pin .................................................................................................................125 mA
Input clamp current, IIK (VI < 0 or VI > VDD).......................................................................................... ±20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) .................................................................................. ±20 mA
Maximum output current sunk by any output pin .....................................................................................25 mA
Maximum output current sourced by any output pin ..................................................................................25 mA
Note: Power dissipation is calculated as follows: PDIS = VDD x {IDD - IOH} + {(VDD-VOH) x IOH} + (VOL x IOL)
† NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.



Parameter Name Value
Device Description 8-bit I/O Port Expander
Operating Voltage Range (V) 1.8 to 5.5
Operating Temp Range (°C) -40 to 125
Interface I²C™
Max. Bus Frequency (kBits/s) 1700





Description

The MCP23008 features:

  • 8-bit port expander with interrupt output
  • 3 adddress inputs for up to 8 devices on one bus
  • 25mA sink/source capability per I/O
  • Supports 100kHz, 400kHz and 1.7MHz I2C?Compatible modes
  • Internal power-on-reset (POR)




    • Customers Who Bought This Item Also Bought

    Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
    You may also be interested in :
    Relays
    WIMA MKP4 0.22UF 630V
    WIMA MKP4 4.7UF 630VDC
    Tapes, Adhesives
    803
    AC452-2
    Static Control, ESD, Clean Room Products
    DPA5
    PA800-A41
    Integrated Circuits (ICs)
    TA8435H
    1MB12-140
    Switches
    US32DMRJ
    HBGQ22P-11ET
    Fans, Thermal Management
    3610ML-05W-B49
    1608KL-05W-B39
    View more