PinoutSpecifications Rating Symbol Value Unit Power Supply Voltage VCC 0.5to+7.0 V Voltage Relative to VSS For Any PinExcept VCC Vin, Vout 0.5 to VCC + 0.5 V Output Current Iout ± 20 mA Power Dissipation PD 1.0 W Tempera...
MCM6206BA: PinoutSpecifications Rating Symbol Value Unit Power Supply Voltage VCC 0.5to+7.0 V Voltage Relative to VSS For Any PinExcept VCC Vin, Vout 0.5 to VCC + 0.5 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Value |
Unit |
Power Supply Voltage |
VCC |
0.5to+7.0 |
V |
Voltage Relative to VSS For Any Pin Except VCC |
Vin, Vout |
0.5 to VCC + 0.5 |
V |
Output Current |
Iout |
± 20 |
mA |
Power Dissipation |
PD |
1.0 |
W |
Temperature Under Bias |
Tbias |
10to+85 |
°C |
Ambient Temperature |
TA |
0to+70 |
°C |
Storage Temperature - Plastic |
Tstg |
55 to + 125 |
°C |
NOTE: Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to RECOMMENDED OPERATING CONDITIONS. Exposure to higher than recommended voltages for extended periods of time could affect device reliability.
The MCM6206BA is a 262,144 bit static random access memory organized as 2,768 words of 8 bits. Static design eliminates the need for external clocks or iming strobes, while CMOS circuitry reduces power consumption and provides or greater reliability.
This device meets JEDEC standards for functionality and pinout, and is available in plastic smalloutline Jleaded packages.
• Single 5 V ± 10% Power Supply
• Fully Static - No Clock or Timing Strobes Necessary
• Fast Access Times: 12/15/20/25 ns
• Equal Address and Chip Enable Access Times
• Output Enable (G) Feature for Increased System Flexibility and to Eliminate Bus Contention Problems
• Low Power Operation: 125 140 mA Maximum AC
• Fully TTL Compatible - Three State Output