MCM36F7

Pinout




Specifications

Rating	Symbol	Value	Unit
Power Supply Voltage	VEE	0.5 to + 4.6	V
Voltage Relative to VSS	Vin, Vout	0.5 to VDD + 0.5	V
Output Current (per I/O)	Iout	± 20	mA
Ambient Temperature	TA	0 to 70	°C
Die Temperature	TJ	110	°C
Temperature Under Bias	Tbias	10 to + 85	°C
Storage Temperature - Plastic	Tstg	55 to + 125	°C

Description

The MCM36F6 (256KB) is configured as 64K x 36 bits and the MCM36F7 (512KB) is configured as 128K x 36 bits. Both are packaged in a 144pin dual inline memory module (DIMM). Each module uses Motorola's 3.3 V 64K x 18 bit flowthrough BurstRAMs.

  Address (A), data inputs (DQ, DP), and all control signals except output enable (G) are clock (K) controlled through positiveedgetriggered noninverting registers.

Write cycles are internally selftimed and initiated by the rising edge of the clock (K) input. This feature provides increased timing flexibility for incoming signals. Synchronous byte write (BWx) and global byte write (WE) allows writes to either individual bytes or to both bytes.
• Single 3.3 V + 10%, 5% Power Supply
• Plug and Pin Compatibility with 1MB and 2MB
• Multiple Clock Pins for Reduced Loading
• All Inputs and Outputs are LVTTL Compatible
• Byte Write and Global Write Capability
• Fast SRAM Access Times: 10 ns
• Berg Connector, Part Number: 6117831844
• 144Pin DIMM Module