Features: The XOSC will contain circuitry to dynamically control current gain in the output amplitude. This ensures a signal with low harmonic distortion, low power and good noise immunity.• High noise immunity due to input hysteresis• Low RF emissions with peak-to-peak swing limited d...
MC9S12XE: Features: The XOSC will contain circuitry to dynamically control current gain in the output amplitude. This ensures a signal with low harmonic distortion, low power and good noise immunity.• H...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.61 - 2.56 / Piece
8-bit Microcontrollers (MCU) 8 Bit 128K FLASH 8K RAM
US $1.73 - 2.75 / Piece
8-bit Microcontrollers (MCU) 8 Bit 128K FLASH 8K RAM
US $1.74 - 2.77 / Piece
8-bit Microcontrollers (MCU) 8 Bit 128K FLASH 8K RAM
Num | Rating | Symbol | Min | Max | Unit |
1 | I/O, regulator and analog supply voltage | VDD35 | 0.3 | 6.0 | V |
2 | Digital logic supply voltage2 | VDD | 0.3 | 2.16 | V |
3 | PLL supply voltage2 | VDDPLL | 0.3 | 2.16 | V |
4 | NVM supply voltage2 | VDDF | 0.3 | 3.6 | V |
5 | Voltage difference VDDX to VDDA | VDDX | 6.0 | 0.3 | V |
6 | Voltage difference VSSX to VSSA | VSSX | 0.3 | 0.3 | V |
7 | Digital I/O input voltage | VIN | 0.3 | 6.0 | V |
8 | Analog reference | VRH, VRL | 0.3 | 6.0 | V |
9 | EXTAL, XTAL | VILV | 0.3 | 2.16 | V |
10 | TEST input | VTEST | 0.3 | 10.0 | V |
11 | Instantaneous maximum current Single pin limit for all digital I/O pins3 |
ID | 25 | +25 | mA |
12 | Instantaneous maximum current Single pin limit for EXTAL, XTAL4 |
IDL | 25 | +25 | mA |
13 | Instantaneous maximum current Single pin limit for TEST 5 |
IDT | 0.25 | 0 | mA |
14 | Storage temperature range | Tstg | 65 | 155 |
1 Beyond absolute maximum ratings device might be damaged.
2 The device contains an internal voltage regulator to generate the logic and PLL supply out of the I/O supply. The absolute maximum ratings apply when the device is powered from an external source.
3 All digital I/O pins are internally clamped to VSSX and VDDX, or VSSA and VDDA
4 Those pins are internally clamped to VSSPLL and VDDPLL.
5 This pin is clamped low to VSSPLL, but not clamped high. This pin must be tied low in applications.
The Pierce oscillator (XOSC) module provides a robust, low-noise and low-power clock source. The module will be operated from the VDDPLL supply rail (1.8 V nominal) and require the minimum number of external components. It is designed for optimal start-up margin with typical crystal oscillators.