Multiplexer Switch ICs 2-6V ANLG Mux/Demux
MC74HC4052AN: Multiplexer Switch ICs 2-6V ANLG Mux/Demux
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Operating range: 38 to 47 Gb/s (min.) (note)Signal regeneration with full-rate clock sig...
Number of Channels : | 2 Channel | On Resistance (Max) : | 190 Ohms | ||
Propagation Delay Time : | 40 ns | On Time (Max) : | 245 ns | ||
Off Time (Max) : | 160 ns | Supply Voltage - Max : | 6 V | ||
Supply Voltage - Min : | 2 V | Maximum Power Dissipation : | 750 mW | ||
Maximum Operating Temperature : | + 125 C | Minimum Operating Temperature : | - 55 C | ||
Package / Case : | PDIP-16 | Packaging : | Tube |
The MC74HC4052AN utilize silicongate CMOS technology to achieve fast propagation delays,low ON resistances, and low OFF leakage currents. These analog multiplexers/demultiplexers control analog voltages that may vary across the complete power supply range (from VCC to VEE).
Features of the MC74HC4052AN are:(1)fast switching and propagation speeds;(2)low crosstalk between switches;(3)diode protection on all inputs/outputs;(4)analog power supply range (VCC VEE) = 2.0 to 12.0 V;(5)digital (control) power supply range (VCCGND)=2.0 to 6.0 V;(6)improved linearity and lower ON resistance than metalgate counterparts;(7)low noise;(8)in compliance with the requirements of JEDEC standard No. 7A;(9)chip complexity.
The absolute maximum ratings of the MC74HC4052AN can be summarized as:(1):the parameter is positive DC supply voltage(referenced to GND),the symbol is VCC,the rating is -0.5 to +7.0,the unit is V;(2):the parameter is positive DC supply voltage(referenced to VEE),the symbol is VCC,the rating is -0.5 to +14.0,the unit is V;(3):the parameter is negative DC supply voltage (referenced to GND),the symbol is VEE,the rating is -7.0 to +5.0,the unit is V;(4):the parameter is analog input voltage,the symbol is VIS,the rating is VEE-0.5 to VCC+0.5,the unit is V;(5):the parameter is digital input voltage (referenced to GND),the symbol is Vin,the rating is -0.5 to VCC+0.5,the unit is V;(6):the parameter is DC current,into or out of any pin,the symbol is I,the rating is ±25,the unit is mA;(7):the parameter is power dissipation in still air,the symbol is PD,the rating is 750,500,450,the unit is mW;(8):the parameter is storage temperature range,the symbol is Tstg,the rating is -65 to +150,the unit is ;(9):the parameter is lead temperature,1 mm from case for 10 seconds plastic DIP,SOIC or TSSOP package,the symbol is TL,the rating is 260,the unit is .
Technical/Catalog Information | MC74HC4052AN |
Vendor | ON Semiconductor |
Category | Integrated Circuits (ICs) |
Type | Multiplexer/Demultiplexer |
Voltage Supply Source | Single, Dual Supply |
Voltage - Supply, Single/Dual (±) | ±2 V ~ 6 V, 2 V ~ 12 V |
Circuit | 2 x 4:1 |
On-State Resistance | 100 Ohm |
Mounting Type | Through Hole |
Package / Case | 16-DIP (300 mil) |
Packaging | Tube |
Current - Supply | 40A |
Operating Temperature | -55°C ~ 125°C |
Function | Multiplexer/Demultiplexer |
Drawing Number | * |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | MC74HC4052AN MC74HC4052AN MC74HC4052ANOS ND MC74HC4052ANOSND MC74HC4052ANOS |