MC68HSC05C8A

Features:

• M68HC05 core
• Single 3.0- to 5.5-volt supply
• Available packages:
40-pin dual in-line (DIP)
42-pin plastic shrink dual in-line (SDIP)
44-lead plastic leaded chip carrier (PLCC)
44-lead quad flat pack (QFP)
• On-chip oscillator for crystal/ceramic resonator
• Fully static operation
• 7744 bytes of user ROM
• ROM security feature
• 176 bytes of on-chip random-access memory (RAM)
• Asynchronous serial communications interface (SCI) system
• Synchronous serial peripheral interface (SPI) system
• 16-bit capture/compare timer system
• Computer operating properly (COP) watchdog timer
• 24 bidirectional input/output (I/O) lines
• Seven input-only lines
• User mode
• Self-check mode
• Power-saving stop and wait modes
• High current sink and source on one port pin (PC7)
• Mask selectable external interrupt sensitivity
• Mask-programmable keyscan logic


Pinout




Specifications

Maximum ratings are the extreme limits to which the microcontroller unit (MCU) can be exposed without permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from high static voltages; however, do not apply voltages higher than those shown in the table here. Keep V_In and V_Out within the range V_SS (V_In or V_Out) V_DD. Connect unused inputs to the appropriate voltage level, either V_SS or V_DD.

Rating	Symbol	Value	Unit
Supply voltage	VDD	0.3 to +7.0	V
Current drain per pin excluding VDD and VSS	I	25	mA
IRQ pin only	VIn	VSS 0.3 to 2 x VDD + 0.3	V
Storage temperature range	TSTG	65 to +150

NOTE: This device is not guaranteed to operate properly at the maximum ratings. Refer to 13.7 5.0-V DC Electrical Characteristics and 13.8 3.3-V DC Electrical Characteristics for guaranteed operating conditions.