Features: • Accepts NTSC and PAL Composite Video, SVHS, RGB, and RY, BY• Includes Luma and Chroma Filters, Luma Delay Lines, and Sound Traps• Digitally Controlled via I2C Bus• RY, BY Inputs for Alternate Signal Source• LineLocked Sampling Clock for A/D Converters̶...
MC44011: Features: • Accepts NTSC and PAL Composite Video, SVHS, RGB, and RY, BY• Includes Luma and Chroma Filters, Luma Delay Lines, and Sound Traps• Digitally Controlled via I2C Bus•...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The external components required by the MC44011 are shown in Figure 42. Except for the crystals, all the components are standard value resistors and capacitors, and can be nonprecision. Table 18 describes the external components for each pin.
Rating |
Symbol |
Value |
Unit |
Power Supply Voltage |
VCC1 VCC2 VCC3 |
0.5 to +6.0 0.5 to +6.0 0.5 to +6.0 |
Vdc |
Power Supply Difference (Between any two VCC pins) |
±0.5 |
Vdc | |
Input Voltage: Video 1, 2, SCL, SDL 15 kHz Return RY, BY, Y2, RGB, FC |
Vin |
0.5, VCC1 +0.5 0.5, VCC3 +0.5 0.5, VCC2 +0.5 |
Vdc |
Junction Temperature (Storage and Operating) |
TJ |
65 to +150 |
The Motorola MC44011, a member of the MC44000 Chroma 4 family, is designed to provide RGB or YUV outputs from a variety of inputs. The inputs can be composite video (two inputs), SVHS, RGB, and color difference (RY, BY). The composite video can be PAL and/or NTSC as the MC44011 is capable of decoding both systems. Additionally, RY and BY outputs and inputs are provided for use with a delay line where needed. Sync separators are provided at all video inputs.
In addition, the MC44011 provides a sampling clock output for use by a subsequent triple A/D converter system which digitizes the RGB/YUV outputs. The sampling clock (6.0 to 40 MHz) is phaselocked to the horizontal frequency.
Additional outputs of MC44011 include composite sync, vertical sync, field identification, luma, burst gate, and horizontal frequency.
Control of the MC44011, and reading of status flags, is via an I2C bus.