MC34080

Features:

• Wide Gain Bandwidth: 8.0 MHz for Fully Compensated Devices
   Wide Gain Bandwidth: 16 MHz for Decompensated Devices
• High Slew Rate: 25 V/s for Fully Compensated Devices
   High Slew Rate: 50 V/s for Decompensated Devices
• High Input Impedance: 10¹²
• Input Offset Voltage: 0.5 mV Maximum (Single Amplifier)
• Large Output Voltage Swing: 14.7 V to +14 V for
   Large Output Voltage Swing: V_CC/V_EE = ±15 V
• Low Open Loop Output Impedance: 30 @ 1.0 MHz
• Low THD Distortion: 0.01%
• Excellent Phase/Gain Margins: 55°/7.6 dB for Fully Compensated Devices


Pinout




Specifications

Rating	Symbol	Value	Unit
Supply Voltage (from VCC to VEE)	VS	+44	V
Input Differential Voltage Range	VIDR	(Note 1)	V
Input Voltage Range	VIR	(Note 1)	V
Output Short Circuit Duration (Note 2)	tSC	Indefinite	sec
Operating Ambient Temperature Range	TA	0 to +70	°C
Operating Junction Temperature	TJ	+125	°C
Storage Temperature Range	Tstg	65 to +165	°C

NOTES:
1. Either or both input voltages must not exceed the magnitude of V_CC or V_EE.
2. Power dissipation must be considered to ensure maximum junction temperature (T_J) is not exceeded.


Description

MC34080 is a new generation of high speed JFET input monolithic operational amplifiers. Innovative design concepts along with JFET technology provide wide gain bandwidth product and high slew rate. Wellmatched JFET input devices and advanced trim techniques ensure low input offset errors and bias currents. The MC34080 features large output voltage swing, no deadband crossover distortion, high capacitive drive capability, excellent phase and gain margins, low open loop output impedance, and symmetrical source/sink AC frequency response.

MC34080 is available in fully compensated or decompensated (A_VCL2) and is specified over a commercial temperature range. MC34080 is pin compatible with existing Industry standard operational amplifiers, and allow the designer to easily upgrade the performance of existing designs.