PinoutSpecifications Ratings Symbol Min Typ Max Unit ELECTRICAL RATINGS Supply Voltage at Vs1 and Vs2- Continuous voltage- Transient voltage (Load dump) VsupdcVsuptr - 0.3 2740 V Supply Voltage Vdd and Vcc Vdd - 0.3 5.5 V Logic Inputs...
MC33689: PinoutSpecifications Ratings Symbol Min Typ Max Unit ELECTRICAL RATINGS Supply Voltage at Vs1 and Vs2- Continuous voltage- Transient voltage (Load dump) VsupdcVsuptr ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Ratings |
Symbol |
Min |
Typ |
Max |
Unit |
ELECTRICAL RATINGS | |||||
Supply Voltage at Vs1 and Vs2 - Continuous voltage - Transient voltage (Load dump) |
Vsupdc Vsuptr |
- 0.3 |
27 40 |
V | |
Supply Voltage Vdd and Vcc |
Vdd |
- 0.3 |
5.5 |
V | |
Logic Inputs: MOSI, SCK, CSB, IN, Tx |
Vinlog |
- 0.3 |
Vdd+0.3 |
V | |
Logic output: MISO, INT, Rx, Reset |
Voutlog |
- 0.3 |
Vdd+0.3 |
V | |
Output current Vdd |
Idd |
Internally limited |
A | ||
E+, E- input voltage |
Ve+- |
-0.3 |
7 |
V | |
E+, E- input current |
Ie+- |
-20 |
20 |
mA | |
Out output voltage |
Vout |
-0.3 |
Vcc+0.3 |
V | |
Out output current |
Iout |
-20 |
20 |
mA | |
L1 and L2 - DC Input voltage with a 33k resistor - Transient input voltage (according to ISO7637 specification) and with external component (see figure 1 below). |
Vlxdc Vlxtr |
-18V -100 |
40 +100 |
V V | |
HS1 and HS2 output |
Vhs12 |
internally clamped |
Vs2+0.3 |
V | |
HS3 |
Vhs3 |
-0.3 |
Vs2+0.3 |
V | |
LIN - DC voltage Transient input voltage (according to ISO7637 specification) and with external component (see figure 1 below). |
Vbusdc Vbustr |
-18 -150 |
+40 +100 |
V | |
ESD voltage (HBM 100pF, 1.5k) (GND, T-GND and aGND pins connected together and configured as ground) - LIN, L1, L2 - All other pins |
Vesdh |
-4 -2 |
4 2 |
kV | |
ESD voltage (HBM 100pF, 1.5k) (GND pin configured as ground, T-GND and aGND pins as I/O) - LIN, L1, L2 - All other pins |
Vesdh |
-4 -2 |
4 2 |
kV | |
ESD voltage (Machine Model) All pins (GND, T-GND and aGND pins connected together and configured as ground) |
Vesdm |
-200 |
200 |
V | |
ESD voltage (Machine Model) All pins (GND pin configured as ground, T-GND and aGND pins as I/O) |
Vesdm |
-150 |
150 |
V |