Features: • Dual Low Drop Voltage Regulators, with Respectively 100mA and 200mA Current Capabilities, Current Limitation and Over Temperature Detection with Prewarning• 5V Output Voltage for V1 Regulator• Three Operational Modes (Normal, Standby and Sleep Mode) Separated from the...
MC33389: Features: • Dual Low Drop Voltage Regulators, with Respectively 100mA and 200mA Current Capabilities, Current Limitation and Over Temperature Detection with Prewarning• 5V Output Voltage...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Description |
Symbol |
Min |
Typ |
Max |
Unit |
Test Conditions |
DC Voltage at Pin Vbat |
Vbat |
27 |
V |
|||
Transient Voltage at Pin Vbat |
40 |
V |
t<500ms (Load Dump) | |||
DC Voltage at Pins CANH CANL |
27 |
V |
||||
Transient Voltage at Pins CANH CANL |
40 |
V |
0<V2<5.5, Vbat>0, t<500ms | |||
Coupled Transient Voltage at Pins CANH CANL |
-100 |
100 |
V |
With 100Ω Termination Resistors. Coupled Through 1nF (note1) | ||
DC Voltage at Pins V1 V2 |
-0.3 |
6 |
V |
|||
DC Current at output pins: RX, MISO, RSTB, INTB |
-20 |
20 |
mA |
|||
DC Voltage at input pins TX, MOSI, SCLK, CSB, RSTB |
-0.3 |
6 |
V |
|||
DC Voltage at Pins L0, L1, L2 |
-0.3 |
40 |
V |
|||
Current at Pins L0, L1, L2 |
-15 |
mA |
||||
Transient Current at Pin V3 |
-30 |
20 |
mA |
|||
DC Voltage at Pins RTH, RTL |
-0.3 |
40 |
V |
0<Vbat<40V | ||
ESD Voltage on any Pin (HBM 100pF, 1.5K) |
-2 |
2 |
kV |
|||
ESD Voltage on L0, L1, L2, CANH, CANL, Vbat |
-2 |
2 |
kV |
|||
ESD Voltage on any Pin (MM 200pF, 0Ω). |
-150 |
150 |
V |
|||
Junction Temperature |
Tj |
-40 |
150 |
°C |
||
Junction Temperature |
Tjt |
-40 |
160 |
°C |
||
Storage Temperature |
Ts |
-65 |
150 |
°C |
||
RTH, RTL Termination Resistance |
500 |
16k |
Ω |
|||
Junction to Heatsink Thermal Resistance for HSOP20 |
3.1 |
K/W |
33% Power on V1, 66% on V2 (Including CAN), Note 2 | |||
Junction to Pin Thermal Resistance for SO28WB |
17 |
K/W |
Note 2, Note 3 |