DescriptionThe MC33286DW is one member of the MC33286 family which is designed as the dual high side power switch that offers higher reliability as well as protection and diagnostic features. The MC33286DW consists of two independent 35m Rdson switches in a surface mount package. It can be directl...
MC33286DW: DescriptionThe MC33286DW is one member of the MC33286 family which is designed as the dual high side power switch that offers higher reliability as well as protection and diagnostic features. The MC...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The MC33286DW is one member of the MC33286 family which is designed as the dual high side power switch that offers higher reliability as well as protection and diagnostic features. The MC33286DW consists of two independent 35m Rdson switches in a surface mount package. It can be directly interfaced with a microcontroller for control and diagnostic functions. The device is fully protected against overcurrents, short-circuits and incorporates an over-temperature shutdown. MC33286DW can be directly and continuously supplied by the battery and offers a very low quiescent current in standby mode.
Features of the MC33286DW are:(1)Designed for Automotive Applications; (2)Junction Temperature Range from -40 to 150 ; (3)Operating Voltage Range from 8V to 40V; (4)Maximum Breakdown Voltage greater than 40V; (5)Surface Mount Package; (6)35m Rdson at 25 ; (7)Overtemperature Protection with Hysteresis; (8)Under Voltage Shutdown; (9)Reverse Battery protected; (10)Open Load Detection in On-State; (11)Diagnostic Output; (12)ESD Protection 2kV; (13)Current Limitation at 30A; (14)Loss of ground protected; (15)Standby Current less than 10 uA at Vbat = 14V.
The absolute maximum ratings of the MC33286DW can be summarized as:(1)Vbat and Vbatc Voltage : Continuous/Pulse: -0.3 to 40 V;(2)OUT1, OUT2 Voltage with Respect to Gnd : Continuous / Pulse:-0.3 to 40 V;(3)OUT1, OUT2 to Vbtap Voltage : Continuous: 40 V;(4)St1, St2 Voltage : Continuous/Pulse: -0.3 to 5.5 V;(5)IN1, IN2 Voltage : Continuous/Pulse: -0.3 to 10 V;(6)In1, In2, St1, St2 Current: +/-4 mA;(7)ESD all Pins: +/-2000 V;(8)OUT1, OUT2 DC Output Current: 6 A;(9)OUT1, OUT2 Pulse Current: 30 A. If you want to know more information such as the electrical characteristics about the MC33286DW, please download the datasheet in www.seekic.com or www.chinaicmart.com.