MC33284

NOTES: 1. Either or both input voltages should not exceed V_CC or V_EE.
2. Power dissipation must be considered to ensure maximum junction temperature (T_J) is not exceeded (see Figure 2).

The MC33282/284 series of high performance operational amplifiers are quality fabricated with innovative bipolar and JFET design concepts. This dual and quad amplifier series incorporates JFET inputs along with a patented ZipRTrim) element for input offset voltage reduction. MC33282/284 series exhibit low input offset voltage, low input bias current, high gain bandwidth and high slew rate. Dualdoublet frequency compensation is incorporated to produce high quality phase/gain performance. In addition, the MC33282/284 series exhibit low input noise characteristics for JFET input amplifiers. Its all NPN output stage exhibits no deadband crossover distortion and a large output voltage swing. They also provide a low open loop high frequency output impedance with symmetrical source and sink AC frequency performance.

The MC33282/284 series are specified over 40° to +85 and are available in plastic DIP and SOIC surface mount packages.
• Low Input Offset Voltage: Trimmed to 200 mV
• Low Input Bias Current: 30 pA
• Low Input Offset Current: 6.0 pA
• High Input Resistance: 10¹²
• Low Noise: 18 nV / Hz @ 1.0 kHz
• High Gain Bandwidth Products: 35 MHz @ 100 kHz
• High Slew Rate: 15 V/ms
• Power Bandwidth: 175 kHz
• Unity Gain Stable: w/Capacitance Loads to 300 pF
• Large Output Voltage Swing: +14.1 V/14.6 V
• Low Total Harmonic Distortion: 0.003%
• Power Supply Drain Current: 2.15 mA per Amplifier
• Dual Supply Operation: ±2.5 V to ±18 V (Max)