MC145483

Features: • Single 3 V Power Supply• 13Bit Linear ADC/DAC Conversions with 2s Complement Data Format• Typical Power Dissipation of 8 mW, PowerDown of 0.01 mW• FullyDifferential Analog Circuit Design for Lowest Noise• Transmit BandPass and Receive LowPass Filters OnChi...

product image

MC145483 Picture
SeekIC No. : 004415473 Detail

MC145483: Features: • Single 3 V Power Supply• 13Bit Linear ADC/DAC Conversions with 2s Complement Data Format• Typical Power Dissipation of 8 mW, PowerDown of 0.01 mW• FullyDifferenti...

floor Price/Ceiling Price

Part Number:
MC145483
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/27

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Single 3 V Power Supply
• 13Bit Linear ADC/DAC Conversions with 2s Complement Data Format
• Typical Power Dissipation of 8 mW, PowerDown of 0.01 mW
• FullyDifferential Analog Circuit Design for Lowest Noise
• Transmit BandPass and Receive LowPass Filters OnChip
• Transmit HighPass Filter May be Bypassed by Pin Selection
• Active RC PreFiltering and PostFiltering
• OnChip Precision Reference Voltage of 0.886 V for a 5 dBm TLP @ 600 W
• 3Terminal Input Op Amp Can be Used, or a 2Channel Input Multiplexer
• Receive Gain Control from 0 dB to 21 dB in 3 dB Steps in Synchronous Operation
• PushPull 300 W Power Drivers with External Gain Adjust



Pinout

  Connection Diagram


Specifications

Symbol Parameter Value Unit
VDD DC Supply Voltage (Referenced to GND) 0.5 to + 18 V
  Voltage on Any Analog Input or Output Pin VSS 0.3 to VDD + 0.3 V
  Voltage on Any Digital Input or Output Pin VSS 0.3 to VDD + 0.3 V
TA Operating Temperature Range 40 to + 85 °C
Tstg Storage Temperature Range 85 to +150
°C



Description

The MC145483 is a 13bit linear PCM CodecFilter with 2s complement data format, and is offered in 20pin SOG and SSOP packages. This device performs the voice digitization and reconstruction as well as the band limiting and smoothing required for the voice coding in digital communication systems. MC145483 is designed to operate in both synchronous and asynchronous applications and contains an onchip precision reference voltage.

MC145483 has an input operational amplifier whose output is the input to the encoder section. The encoder section immediately lowpass filters the analog signal with an active RC filter to eliminate very high frequency noise from being modulated down to the passband by the switched capacitor filter. From the active RC filter, the analog signal is converted to a differential signal. From this point, all analog signal processing is done differentially. MC145483 allows processing of an analog signal that is twice the amplitude allowed by a singleended design, which reduces the significance of noise to both the inverted andnoninverted signal paths. Another advantage of this differential design is that noise injected via the power supplies is a commonmode signal, MC145483 is cancelled when the inverted and noninverted signals are recombined. This dramatically improves the power supply rejection ratio.

After the differential converter MC145483, a differential switched capacitor filter band passes the analog signal from 200 Hz to 3400 Hz before the signal is digitized by the differential 13bit linear A/D converter. The digital output is 2s complement format.

The decoder digital input accepts 2s complement data and reconstructs it using a differential 13bit linear D/A converter. The output of the D/A is lowpass filtered at 3400 Hz and sinX/X compensated by a differential switched capacitor filter. The signal of MC145483 is then filtered by an active RC filter to eliminate the outofband energy of the switched capacitor filter.

The MC145483 PCM CodecFilter has a high impedance VAG reference pin which allows for decoupling of the internal circuitry that generates the midsupply VAG reference voltage to the VSS power supply ground. This reduces clock noise on the analog circuitry when external analog signals are referenced to the power supply ground.

The MC145483 13bit linear PCM CodecFilter accepts both Short Frame Sync and Long Frame Sync clock formats, and utilizes CMOS due to its reliable lowpower performance and proven capability for complex analog/digital VLSI functions.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Power Supplies - Board Mount
Resistors
Soldering, Desoldering, Rework Products
Potentiometers, Variable Resistors
View more